Electric boiler BNE 1

fuel oilresidentialindoor

Floor standing oil combination boiler for residential use. 120 liter stainless steel corrugated tank immersed in the primary circuit. Control panel including: main switch, summer-winter switch, energy selection switch, manometer thermometer, sanitary and heating thermostats . 2.4 kW electrical heater with pilot lamp. Projected polyurethane foam insulation. High and low temperature heating connection kits available as an option. Several types of regulations also available as an option. Boilers compatible with heating accessories and hot water recommended by ACV. Non Ecodesign compliant. Constructive characteristics Capacity (total) - 184 - L Capacity (primary) - 64 - L Capacity (domestic hot water) - 120 - L Capacity expansion tank(s) - - - L Chimney connection - 130 - Ømm Connection - heating - 1 F - Ø" Connection - DHW - 3/4 M - Ø" Max operating temperature - 90 - °C Water pressure drop boiler at Δt = 20°C - 20 - mbar Max service pressure heating (primary) - 3 - bar Max service pressure (DHW) - 8,6 - bar Weight (empty) - 204 - kg Combustion Input max (heating) HCV - 26,7 - kW Input max (heating) LCV - 25 - kW Combustion efficiency - 91 - % Efficiency at 30% load (EN677) - 90 - % Efficiency (max output) 80/60°C - 91 - % CO emissions max output - 60 - ppm Mass rate of combustion products (gas) - 53 - kg/h NOx class (EN15502) - 5 - Output power max (80/60°C) - 22,5 - kW Gas flow rate (max output) - 2,1 - kg/h Domestic hot water performance Peak flow at 40°C - 311 - L/10’ Peak flow 1st hour at 40°C - 908 - L/60’ Continuous flow at 40°C - 716 - L/h Electrical Characteristics Voltage - 230 - V Frequency - 50 - Hz Protection IP - 30 - Electrical consumption - 150 - W Electrical consumption electric boiler mode - 2500 - W Electrical power requirements - 10,9 - A