Ideal solution for renovation applications.
Easy to install : Nano Air 50 is suited to all wall thicknesses (250 to 470 mm) and need no ductwork installation around the house.
Acoustic comfort : silent operation (19 dB(A)* for an airflow of 14 m3/h).
Energy management : The Nano Air 50 recovers heat from exhaust air to warm incoming air (up to 88% of heat recovered) and consumes little electricity (3.8 W).
Purified air : With its efficient G3 filters that protect against dust, pollen and insects, Nano Air 50 guaranties a cleaner air supply.
*Sound radiated at 3 m
Single room Heat Recovery Ventilation unit.
Airflow from 14 m3/h to 54 m3/h.
3 possible speed modes.
2 Filters G3.
EC Motor.
Ceramic Heat Exchanger with efficiency up to 88%.
Nano Air 50 is operated with a remote controller or the buttons on the ventilator casing:
Manually with three-position switches for more basic functionality
With remote controller to provide wider control capabilities (night mode, humidity settings)
Operating limit temperatures:
Ambient temperature ranging from -20°C to +50°C and relative humidity up to 80%.
Available accessory : finishing plate.
• General and permanent ventilation for dwellings.
• Single room heat recovery system.
• Ideal solution for renovation and new buildings
In heat recovery mode, Nano Air 50 operates in two
cycles, 70 seconds each.
• Cycle I: Warm stale air is extracted from the room.
As it flows through the ceramic regenerator, it
heats and moisturizes the regenerator. As the
ceramic regenerator gets warmed up, the unit
switches to the supply mode.
• Cycle II: Fresh intake air flows through the
regenerator and absorbs accumulated heat and
humidity.