Mullion and transom curtain wall
(aluminium and glass)
6400 SERIES Alumico Architectural Inc

The 6400 SERIES curtain wall systems manufactured by Alumico Architectural inc., will be in accordance with the following specifications:

Inside and outside extrusions shall be 50,8mm (2") wide and have a depth of 101,6mm (4") and will meet the required structural properties (consult wind load chart). The structural part of the system shall be the inner mullion. The assembly of the horizontal and the vertical mullions shall be made by means of extruded aluminum shear blocks and hidden screws. A pressure plate fastened to the mullion will secure the insulated glass unit from the outside and will also serve as a cap. A P.V.C. extrusion shall form a thermal seal between the inner mullion and the pressure plate. The perimeter of the glass shall be sealed by a flexible glazing gasket on the exterior and a 3mm (1/8") glazing tape with a continuous built-in shim on the interior side.

All aluminum components shall be made of 6063 alloy with T-5 temper.