Exterior projector for public spaces
DUEVENTI
Arcluce S.p.A.
Outdoor projector with die-cast body, frame and supporting plate, painted with polyester powder pain resistant to corrosion, the elements, and salt spray fogs.
Tempered, anti-thermal shock safety glass, silicon rubber fittings, and reflector in 99.98 aluminium oxidised and polished by anodising; light beam adjustable from concentrating to diffusing by means of a screwdriver. It mounts G12 metal halide lamps from 35W to 150W and LEDs; the RGB LED (colour changing) version is also available.
Double watertight cable clamp for cascade connection; wiring on galvanised steel removable plate, and stainless steel external screws.
The optics compartment is separated from the wiring compartment by means of a joint with graduated scale for orientation.
Three types of rotation are available: 360° on the base, 350° between the optics and the wiring compartments, and from 90° to 180° for the optics compartment.
The wide range of available versions (with high base plate, low base plate, extension pole) and accessories (slanted visor, dichroic colour filters, lens for ellipsoidal beam, and louvre) allows to adapt this appliance to any and all technical lighting needs. The DUEVENTI series is completed by the DUEDIECI series, having smaller sizes and lower power ratings.
Size: diameter = 210mm, L = 243mm, H = from 360mm to 750mm.
IP66 protection class, electrical insulation class: I.
Appliance built in full compliance with standards EN 60598-1and EN 60598-2-1.
Tempered, anti-thermal shock safety glass, silicon rubber fittings, and reflector in 99.98 aluminium oxidised and polished by anodising; light beam adjustable from concentrating to diffusing by means of a screwdriver. It mounts G12 metal halide lamps from 35W to 150W and LEDs; the RGB LED (colour changing) version is also available.
Double watertight cable clamp for cascade connection; wiring on galvanised steel removable plate, and stainless steel external screws.
The optics compartment is separated from the wiring compartment by means of a joint with graduated scale for orientation.
Three types of rotation are available: 360° on the base, 350° between the optics and the wiring compartments, and from 90° to 180° for the optics compartment.
The wide range of available versions (with high base plate, low base plate, extension pole) and accessories (slanted visor, dichroic colour filters, lens for ellipsoidal beam, and louvre) allows to adapt this appliance to any and all technical lighting needs. The DUEVENTI series is completed by the DUEDIECI series, having smaller sizes and lower power ratings.
Size: diameter = 210mm, L = 243mm, H = from 360mm to 750mm.
IP66 protection class, electrical insulation class: I.
Appliance built in full compliance with standards EN 60598-1and EN 60598-2-1.
