video corpo

epoxy resin flooring / industrial / smooth / concrete look
BAUPOX® 200 BAUTECH

{{requestButtons}}

Characteristics

  • Material:

    epoxy resin

  • Market:

    industrial

  • Finish:

    smooth

  • Appearance:

    concrete look

  • Options:

    interior, high-resistance, self-leveling

Description

Pigmented epoxy resin containing no solvents and water of a wide range of applications

BAUPOX® 200 is a two‐component, pigmented epoxy resin with the addition of mineral fillers.
USE

Making thin‐coat floors
Making self‐spreading/levelling floors
Making finishing layers in industrial and parking systems on the basis of natural quartz aggregate
FOUNDATION

Concrete foundation must be stable and of proper carrying capacity for the target static and dynamic loads – concrete of class no less than C20/25 of minimal stripping strength 1,5 N/mm2. The acceptable humidity of the foundation cannot exceed 4% in terms of weight.
The foundation must have a hermetic horizontal insulation protecting it from moisture sucked up through capillary tubes.
Foundations which are to be protected with epoxy layers must be clean and absorbent. Cement wash, dirt of all kinds and old protection layers should be removed mechanically by grinding, shot blasting or milling. When renovating old epoxy floors, their adherence to the foundation must be absolutely checked (no less than 1.5 N/mm2) and the surface degreased and tarnished mechanically.
CONDITIONS OF APPLICATION

- Temperature of the foundation – no less than +10°C
- Relative humidity of the air – max. 75%
NOTE: Special attention should be paid that the temperature of the foundation be at least 3ºC over the dew point.
Rooms in which the works are performed must be ventilated.