Panels
The Nylofor Medium panel is reinforce with four ‘V’ shaped beams to enhance the rigidity, and provide a longer delay factor against cut-through.
Mesh Pattern: 100 x 50mm resistance welded at each intersection
Horizontal Wires: 4mm diameter at 100mm centres
Vertical Wires: 4mm diameter at 50mm centres
All panels have a 30mm barbed top edge.


Posts and fixation


Twilfix 2000
- Posts pitched at 2.525m centres
Post size 60 x 60 x 2mm RHS
- 80 x 60 x 2.5mm RHS for multi-lift fences at 4.0m high
- utilise steel fixing brackets to secure panels to the front face of the posts.
- I/V = 8.03 cm3


Bekafast
- Posts pitched at 2.525m centres
- Unique profiled section 50mm wide x 60mm deep
- I/V = 5.23cm3
NO FIXINGS REQUIRED


Coating techniques
Panels made out of galvanised wires (min. 40 g/m2). An adhesion coating is given for a perfect adhesion with the plastic coating (min. 100 micron).
The posts are polyester powder coated with a galvanised substrate in accordance with Euro norm 10147. Afterwards an adhesion coating is applied and finally the posts are plastic coated (min. 60 micron).


Finish
bonded PVC coated green with a galvanised substrate