Application:
Structural adhesive for heterogeneous materials: brickwork, marble, granite, wood, aluminum. Fastening. Sealing. Smoothing.
Processing:
Manual mixing. Mechanical mixing with automatic mixing/dispensing machines equipped with pressure plate. Spatula application. Application with dispensing nozzle.
Description:
Two component fi lled epoxy system. Thixotropic. Solvent free. Minimum shrinkage on thin thickness. The application is possible also on vertical surfaces, being the system a paste. Medium reactivity. Good resistance to yellowing. Suitable for operating temperatures from -25°C to +80°C when it applied in a maximum thickness of 1mm.
Instructions:
The surfaces must be clean and dry. Generally a mechanical abrasion or sanding followed by degreasing with solvent (ex. acetone) is suffi cient. Add the appropriate quantity of hardener to the resin, mix carefully. Use slow mixing mixer or mix by hand with a spatula. The fi nal cleaning of the equipment can be carried out with normal solvent such as acetone, nitro, etc.
Curing / Postcuring:
Normally the post-curing is not necessary.
Storage:
Epoxy resins and their hardeners can be stored for two years in the original sealed containers stored in a cool, dry place. The hardeners are moisture sensitive therefore it is good practice to close the vessel immediately after each use.
Handling precautions:
Refer to the safety data sheet and comply with regulations relating to industrial health and waste disposal.