Linear wall mounted fluorescent luminaire
Housing: In extruded aluminium with die-cast aluminium end caps
Diffuser: In smooth antidazzle, dust-proof plexiglass.
Reflector: in high gloss bent aluminium, with high luminous efficiency
Painting: with white acrylic powder coating, UV-stabilized, anti-yellowing, upon phosphate treatment.
Lampholder: In polycarbonate, with phosphor bronze contacts
Electric gear: 230V/50 Hz power supply. Rigid wire, 0,50 sqmm cross-section and PVC-HT sheath, resistant up to 90°C according to CEI 20/20 standards. 2P+T terminal block with maximum allowed lead cross-section of 2.5 sqmm.
Standard supply: Universal connection for both ceiling and wall mounting. End caps feature a half-blank section for mounting in continuous lines. 3.15A protection fuse
Regulations: Produced according to applicable EN60598-1 CEI 34 - 21 standards, IP40IK03 degree of protection according to EN 60529 standards. This product can be installed on normally inflammable surfaces. They are provided with ENEC European certification.
Emergency version: In the event of a blackout, one lamp connected to the emergency circuit remains on (maintained version), thus avoiding the inconvenience usually caused by sudden power failure. Its emergency run time is 60 minutes. When power supply is restored, the battery recharges automatically.