Surface Fine structure matt (standard), silk gloss, matt
Powder-coated 200 °C before assembly
Colours RAL Classic, RAL Design, NCS, VSR
Finishes Wood, stone, rust
Pretreatment Ocean Line Plus possible
Notes Slat end caps made of black plastic
Slats are exchangeable
For technical reasons, a horizontal cross-panel is required from a sash height of 1900 mm; upper slat panel is moveable,
lower slat panel is fi xed
Structural height of adjustment lever approx. 30 mm – please observe in regard to cranking
Drain holes at bottom of frame
Min./max. dimensions Width: 280 to 800 mm
Height: 800 to 2500 mm
Min./max. infeed 48,0 – 50,0 mm
Min./max. inclination angle 12 – 75°
Weight Approx. 6 kg/m²
Frame profi le 75 × 32 mm extruded aluminium hollow chamber profi le
Slat profi le 54 × 10 mm extruded aluminium hollow chamber profi le
Slat carrier profi le 32 × 11 mm extruded aluminium
Horizontal cross-panel profi le 60 × 32 mm extruded aluminium hollow chamber profi le
Adjustment Adjustable slats via lateral swivel lever lock with detent positions
Stop bead Supplied loose, black or white rubber (depending on the sash colour)
Corner connections Aluminium bracket, glued-in and additionally secured by plastic pins
Options Notching | Floor locking | Electric drive | Rabbet bead | Vertical cross-panel | Half-round arch (mounted) | Horizontal
cross-panel | Inside opener crank | Rod lock | Basic frame | Pre-installation | Segmental arch, hollow (mounted) | Catch
| Segmental arch, solid (mounted) | Frames | Additional adjustable slat panel | Easyfl ex