Ceiling access door
ADS SB FD
Exitile
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
Ceiling access panels specifically designed to fit into the structural membrane of the Armstrong Drywall Grid System.
Description
The access panel is inserted directly into a pre-cut hole in the ceiling membrane prior to wet finishes being applied, and is fixed into position using the frame clamps provided. Supplied with a beaded frame to allow for tape and feather skimming on site and comes complete with a fully removable flush metal door. This is a 1 Hour Fire Rated Access Panel, which has been tested to B.S.476: Part 22:1987.
Construction
Constructed from 1.2mm and 1mm thick Zintec Steel, with a polyester powder coating of matt white Ral 9010, 20% Gloss (other colours available upon request). The panels are also available in Stainless Steel for use in corrosive areas (quote using product code and ref SS). The removable flush metal door is fitted with a continuous metal hinge and is secured using a standard budget lock. Alternative lock types can be provided upon request.
Dimensions
Panel sizes are governed by the actual grid size of the Armstrong Drywall System, and increase in increments of 150mm from a nominal minimum size of 450 x 450mm, up to a maximum size of 1200 x 1200mm nominal. When specifying the size required, please state the actual size of grid around the access panel opening e.g. 450 x 450mm, 600 x 450mm, 600 x 600mm, 1200 x 600mm etc.
