Raised access floor hardwood panel GAMMA INDUSTRIES
BUROBOX

The Burobox panel is widely used in office buildings.

It can be covered with textile tiles used with access flooring, free laid on site.

Composition :
The Burobox panel is made up as follows :
A high density resin bonded core, thickness 30 or 38 mm.
A bottom tray of 0.5 mm thick galvanized steel turning up the sides of the panel.

Coverings :
The Burobox panel is available without covering.

Dimensions :
Standard size : 600 mm.
Special size : 675 mm, for thickness 38 mm only.

Options :
Top varnished.
Top plate of 0.5 mm thick galvanized steel.
19 mm thick core.
Fire classification :
The Burobox panel is classed M1 ( SNPE report n° 13149-07 ).

A Burobox panel classified M0 is also available.

Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.

Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 46 to 51 dBA, depending on the thickness of the panel and the coverning ( Dn,f,w according to Standard EN ISO 140-12 ).

More information...