Active chilled beam CBD / CBX / CHB / REE / REO

As a 300 mm wide unit, Halton CBD is ideal for aesthetic office and meeting room applications. Combined cooling heating and supply air unit for ceiling installation Narrow structure enables indistinguishable installation PRODUCT MODELS AND ACCESSORIES Model with combined heating and cooling coil Several duct and water pipe connection locations available The active chilled beam has an integral recirculation air path through the perforated bottom panel. The bottom panel is openable and demountable from either side for general maintenance and cleaning. The bottom panel is removable without using any special tools. The air supply is bi-directional. The active chilled beam is 295mm wide and 240mm high. The active chilled beams has an inlet duct diameter of 100 mm. The frame, bottom and side panels is made of galvanised steel plate. All visible parts are white painted to RAL 9010 20% gloss. All pipes are manufactured from copper connection pipes with a wall thickness of 0.9-1.0 mm. The cooling heat exchanger consists of six 15mm pipes connected in series. The fins of the heat exchanger are manufactured from aluminium. Heating is incorporated within the heat exchanger by two 10mm pipes connected in series. All joints are soldered and factory pressure tested. Pipework have maximum operation pressure of 1.0 MPa. Each active chilled beam is protected by a removable plastic coating. Duct connection and pipe ends are sealed during transit. The active chilled beams are identifiable by a serial number printed on labels attached to both the active chilled beam and the cardboard packaging.