stainless steel grating / for drain channels / for walkways / non-slip
KPHMG150 Kent Stainless



  • Material:

    stainless steel

  • Product applications:

    for walkways, for drain channels

  • Technical characteristics:



Kent Pedstrian Heel Mesh Grating (KPHMG150) has 8mm x 44mm openings and either 2mm or 3mm load bearing bars depending on the loading required and the free span of the channel. It is perfect for areas with a propensity for High Heel Traffic – Streetscapes, Railway Stations, Airports, Public Plaza. It is often also used internally on Drainage Channels in Lesiure Centres or Public Areas.

It is a low cost alternative to stainless steel wedgewire grating

Finish is Electropolished as standard for extra hygiene and corrosion resistance. Can alternatively be supplied with a Bead Blasted (higher SRV) or Satin Finished top.
Typical sizes are 123mm wide x 990mm for Kent Precinct Channel but covers can be made 150mm/200mm wide on KAF Angle Frame, or to suit any Gully covers - typically the KV215 and KV315 Gullies

25mm depth as standard – increased to 40mm or 50mm where loading requires this. Top Bars typically 2mm – can be increased to 3mm where required either for loadings or for aesthetic reasons, or where a wider surface area is preferred under barefoot.

This Mesh is often used also as an Air Vent Cover – eg in an office block or on a connecting bridge at an airport or railway station. It is regularly called for in these applications with cut-outs for LED uplighters. Often depth is reduced to 20mm for Edge Air Vent Covers as these have little or no traffic overhead.

It has also been referred to as Kent Close Mesh Grating (KCMG)

Recommended for:
Pallet Trucks

Other Kent Stainless products

External Drainage