Raised access floor structure
T8
Lenzlinger Access Floors
System
The substructure Type 8 is based on a joist system of longitudinal and transverse profiles in a 600 x 600 mm grid, which have a friction-locked connection to the pedestals via anchor screws. Even without panels the system absorbs tractive and shearing forces. It is suitable for installation heights of 300 to 2000 mm. With various profile sizes the bearing capacity or distance between pedestals can be adjusted to the relevant requirements. Pedestals can also be placed outside the grid pattern to bridge channels and pipes. Depending on the construction of the access floor panels the distributed load varies between 15 and 40 kN/m2.
The substructure Type 8 is based on a joist system of longitudinal and transverse profiles in a 600 x 600 mm grid, which have a friction-locked connection to the pedestals via anchor screws. Even without panels the system absorbs tractive and shearing forces. It is suitable for installation heights of 300 to 2000 mm. With various profile sizes the bearing capacity or distance between pedestals can be adjusted to the relevant requirements. Pedestals can also be placed outside the grid pattern to bridge channels and pipes. Depending on the construction of the access floor panels the distributed load varies between 15 and 40 kN/m2.
