Display totem
LINK by Roviras & Torrente MARCAL

Download the Flash plug-in

This product is a total display system from way finding to monoliths including some illuminated components; for permanent and temporary information display. Materials: extruded aluminium section 2.5mm thick and aluminium plate 2.5mm thick.  PVC (poly vinyl chloride) plate and PMMA (poly methyl met-acrylate) plate. Finish: natural anodised aluminium. PVC (poly vinyl chloride) is opaque and PMMA (poly methyl met-acrylate) is clear. To special order only powder coated (RAL colours). The aluminium section is assembled from two half sections; it presents a rectangular profile with radiused visible corners. The open ends are finished by fitting a flat aluminium plate shaped to the rectangular profile.  Window versions; the clear PMMA windows are fitted with two options either flush to the aluminium or inset behind leaving a recessed edge. For removal of temporary information the end plate can have a slot cut which will allow easy removal of the window plates; otherwise the end plates can be removed with a torx key. Illumination of window versions is another option.  The range includes:
Wall hung versions; fixed by structural bondage or secret fix screws on the flat rear face.  Projecting versions; secret fixed to the wall via the flat end plate. Window options can be on one or both sides; illuminated versions also available. Freestanding versions; on a circular aluminium baseplate. Temporary information window versions are available. Totem versions; anchored to a concrete foundation by three anchor ties through three holes in an invisible 5mm thick stainless steel plate laser cut to the rectangular profile. Suspended versions; these are suspended on two stainless steel wires.