L `bus shelter TRAM is composed of a base with structure out of rectangular tube of steel 140x70x3 mm and 50x40x2 mm, is covered with a sheet steel corten ép.5 mm, and with a cast solid awning with a curved form original, composed of an internal reinforcement out of square steel tube 50x50x2mm with reinforcements in profiled steel ép.12 mm, the unit fitted with body by a sheet steel corten ép.25/10 mm in frontage and 6 mm on with dimensions ones.
Taking into account its monolithic configuration, the bus shelter will be posed on a specific steel turntable ép.7 mm, equipped with car M12 funds to seal during the phase of realization of the solid mass concrete, that Ci is equipped with a system of adjustment of level.
In option the bus shelter can be delivered with a bench whose base is made out of exotic wood, of dimensions 1650x400x60 mm, with sheet steel structure corten ép.25/10. Inside the bench take seat the possible electric components necessary to the optional lighting of the bus shelter, the ramp of lighting is located either in the base (lighting by bottom), or in roofing with in this case poses of a thermolacquered extruded aluminum section. In option the bus shelter can also be equipped with side walls with base similar to that of the bus shelter and plates of Triplex glass 10+10 mm of width 1453 mm or 593 Misters All the parts out of steel corten are sanded and treated by a specific cycle of accelerated oxidation and passivation developped at the point by Metalco. Dimensions maximum: 2 modules 1753x2962 mm, Ht=2555 mm; 3 modules 1753x4446 mm Ht=2555 Misters.
