Contemporary public bench in metal (with backrest)
FLASH
METALCO
The FLASH seat, entirely in hot galvanised (in accordance with relevant
UNI standards) and polyester powder coated steel, consists of a pair
of 0 60mm steel tube supports, bent to 180°, pre-drilled for ground
fixing with the suitable expansion bolts (not included), and a seat with
a backrest composed of fifteen 40x20mm oval section steel tubes
welded to the 7mm thick steel end supports. In the middle, the
structure is strengthened by a 6mm thick steel reinforcement, and each
tube is closed off at each end with PVC cops. All fixings are stainless
steel. Maximum dimensions: L = 2000mm, H(backrest) = 810mm,
Hjseat) = 430mm.
UNI standards) and polyester powder coated steel, consists of a pair
of 0 60mm steel tube supports, bent to 180°, pre-drilled for ground
fixing with the suitable expansion bolts (not included), and a seat with
a backrest composed of fifteen 40x20mm oval section steel tubes
welded to the 7mm thick steel end supports. In the middle, the
structure is strengthened by a 6mm thick steel reinforcement, and each
tube is closed off at each end with PVC cops. All fixings are stainless
steel. Maximum dimensions: L = 2000mm, H(backrest) = 810mm,
Hjseat) = 430mm.
