Entry door NOVOPORTA PREMIO E-S-1 / E-S-2
sheet steelgalvanized steelswing

entry door
entry door
Add to favorites
Compare this product
 

Characteristics

Type
entry
Material
galvanized steel, sheet steel
Opening system
swing
Style
contemporary
Glazing
without glazing
Configuration
1 leaf, double leaf
Technical characteristics
security, acoustic, fire-rated, thermally-insulated, burglar-proof, smoke-proof
Color
yellow
Other characteristics
flush, lacquered
Width

Min.: 625 mm
(24.61 in)

Max.: 2,500 mm
(98.43 in)

Height

Min.: 1,750 mm
(68.9 in)

Max.: 2,500 mm
(98.43 in)

Description

THE CLASSIC MODELS Single and double full panel steel door units for indoor and outdoor use. 64 mm door panel, rebate on 3 sides, with homely thick rebate. 1 mm sheet thickness, 1.5 mm optionally available. Internal reinforcement for door closer on hinge side (on active leaf and inactive leaf on double door units). YOUR ADVANTAGES AT A GLANCE! RC2 safety tested to EN 1627 2 securing pins per leaf Security PC mortice lock with drawback latch Inactive leaf lock with front end bolt (2 leaf) Security profile cylinder (drill-protected) Thick rebate adds a homely touch Leaf thickness approx. 64 mm Door panel and frame standard galvanized and primed (powder coated, RAL 9016). Optional: Door panel, frame and hinges with optional design finish. Versions Burglar resistant as per EN 1627 RC2. Filled with mineral wool for heat insulation. Optionally available with soundproofing 40 dB (1 leaf) or 39 dB (2 leaf) tested to EN ISO 140-3, assessed as per EN ISO 717-1 (laboratory values for full panel and RS1 sill). Also available with smoke protection as per DIN 18095 with lowerable floor seal (RS1) or hump sill with acoustic threshold seal (RS2) and overhead door closer (double door units with two Dorma TS 89 F or Geze TS 4000 F overhead door closers, door coordinator, and customized upward and downward locking rebate retracting bolt). Hardware 3-part hinge plates, standard equipped with ball bearings and hinge pin safeguards. Two hinges per leaf, standard primed white, similar to RAL 9016; optionally available in stainless steel, as adjustable 3-D hinges in steel or stainless steel. Spring hinge per leaf up to BR 1250 x 2250 mm. Two securing pins per leaf.

Catalogs

No catalogs are available for this product.

See all of Novoferm‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.