Extractor fan IN

axialwall-mountedceiling

FEATURES Axial fans to extract air directly outside or through short ducting also suitable for glass application with optional glass kit. Low profile grille with operating indicator light. Two fixing screws and click assembly of the grille for easy installation. Double insulated product, without ground wire for fast connection. For ducts Ø 92-100-125-150 mm. Base, Timer, HT, PIR, 12V model options. Reduced internal wall dimensions to allow installation where the bend of ducting is close to the outlet of the product. A version: internal, silent automatic shutter. BB versione: ball bearing motor. SELV 12V version: working at12V AC, installation within the safety zones 1 and 2. IPX4 protected (EN 60529), 45°C working temperature. In accordance with Standard EN 60335-2-80. POSITIONING Wall mounting Ceiling mounting Glass mouting (eccept IN9/3,5") FURTHER INFORMATIONIN Timer version: Turn-off delay adjustable from 2 to 25 minutes. HT version: The fan automatically starts when the humidity in the room is higher than the preset value, adjustable from 40% to 90%. PIR version: The fan automatically starts when the sensor detects a presence in the room. When the room is vacated the fan will continue to run according to the preset value on timer. Careful selection of materials: grille in ABS and body in polypropylene talc filled. Performance tests in accordance with Standard UNI 10531, noise tests in accordance with Standard UNI EN ISO 3741, carried out by IMQ Clima laboratory on products samples (In 10/4, In 12/5, In 15/6 models).