Air-water heat pump which provides the year round runs the annual climate. It does not burn any fossil fuel: capture the energy in the air and multiplies it. Every kW, produces more than 4 thermal energy: 75% of the energy is free, renewable and clean.
Overview
It consists of two modules: a condensing high efficiency DC inverter that ensures operation down to -15 °C outside and a hydronic module to be installed internally.
The engineering has made possible to include in the hydronic module the 3-way valve for domestic hot water production reducing the installation time. The reduced forms allow installation inside a kitchen cabinet.
The control contains the most advanced functions taking account of the climatic season, the load demand and adjusting accordingly the compressor frequency.
Features
Provides DHW with temperatures up to 60°C
DHW Management: Sherpa can manage DHW with extreme flexibility through two management methods: water sensor inserted in the boiler or contact thermostat in the tank.
Climatic curves based on the outside air temperature: two curves are available, one for cooling and one for heating. The climatic curves allow you to change the system temperature according with external climate conditions, adjusting the heat input to the heat requirements of the building in order to obtain energy savings.
Two configurable set points in cooling, Three configurable set points in heating (one of which for DHW): the set points can also be selected by remote contact.