Photoelectric cell for access control
FIT SYNCRO
RIB
State-of-the-art FIT SYNCRO photocells are designed to meet safety requirements for all automatic gate entry systems.
Wall versions are designed for assembly on posts in steel or other smooth material.
The box for flush-mounted installations (ACG8051) makes them easy to FIT to uneven brick surfaces.
The FIT photocells can be installed very close together thanks to the new SYNCHRO function.
FIT SYNCRO TECHNICAL SPECIFICATIONS
BOXES: surface-mounted in polycarbonate and nylon 6.
DIMENSIONS: 74x74x28 mm
POWER INPUT: 12Vdc/24Vac (select using the jumper on the electronic circuit). Make sure the system is compatible with the power provided by the power unit.
POWER CONSUMPTION: 80mA max.
TRANSMITTER: modulated with infrared diode
CAPACITY OF RELAY: 1A - 30Vdc
PROTECTED TO: IP44
GREEN LED: TRANSMITTER powered.
RED LED: RECEIVER aligned. (N.B. after calibration this turns off in the presence of an obstacle).
RANGE SELECTION: 15 m / 30 m (in good weather conditions) N.B.: Range may be reduced in the presence of fog, rain, dust, etc.
Wall versions are designed for assembly on posts in steel or other smooth material.
The box for flush-mounted installations (ACG8051) makes them easy to FIT to uneven brick surfaces.
The FIT photocells can be installed very close together thanks to the new SYNCHRO function.
FIT SYNCRO TECHNICAL SPECIFICATIONS
BOXES: surface-mounted in polycarbonate and nylon 6.
DIMENSIONS: 74x74x28 mm
POWER INPUT: 12Vdc/24Vac (select using the jumper on the electronic circuit). Make sure the system is compatible with the power provided by the power unit.
POWER CONSUMPTION: 80mA max.
TRANSMITTER: modulated with infrared diode
CAPACITY OF RELAY: 1A - 30Vdc
PROTECTED TO: IP44
GREEN LED: TRANSMITTER powered.
RED LED: RECEIVER aligned. (N.B. after calibration this turns off in the presence of an obstacle).
RANGE SELECTION: 15 m / 30 m (in good weather conditions) N.B.: Range may be reduced in the presence of fog, rain, dust, etc.
