Electric bain-marie stock pot 150 litres - Rectangular kettle - 18.2 kW - Width 1200 mm - Fixed kettle with AISI 316L stainless steel heat diffusing base, 10 mm thick - Double walled, hinged and balanced lid - Hot and cold water mixer tap - Drainage by stop tap
Presentation
MBM 150 G - M or MBM 250 G - M
Bain-marie stock pots 150 l or 250 l gas - Width 1200 mm
MBM 150 E - M or MBM 250 E - M
Bain-marie stock pots 150 l or 250 l electric - Width 1200 mm
Description
•Top with raised edge and kettle with surrounded board to form
a seal between the kettle and the top (NF U 60-010 standard).
•Kettle with rounded corners and AISI 316L stainless steel
base, 25/10 thick.
•304 stainless steel clip, 25/10 thick.
•Heat insulated by means of rock wool panels covered with
stainless steel sheet.
•Double walled 304 stainless steel lid which is hinged and
balanced.
•Broad handle made of stainless steel tube.
•1/4 turn hot / cold water mixer tap, diameter 20 x 27, with a
swivelling spout.
•Drainage by drain off valve diameter 40 x 49 (1 1/2") with
fold-down key, located on façade.
•304 stainless steel removable filter.
•Bain-marie water connection fitted with an “EA” check valve
complying with EN 1717 standard.
•Automatic fill and top up for bain-marie using electrovalve and
level sensor.
•Air bleed during initial pressure build-up.
•Calibrated safety device in case of excess pressure.
•Vacuum release when ready for cooling.
•Bain-marie drain tap knob situated on the vertical strip.
Note: regarding the water supply to the appliance, the installer
shall comply with existing health regulations (e.g. disconnector
for certain regions).