gateway interface module / KNX / DIN rail
KNX / DALI GATEWAY TWIN PLUS N 141/21 SIEMENS Building Technologies

{{requestButtons}}

Characteristics

  • Type:

    gateway

  • Other characteristics:

    KNX, DIN rail

Description

With emergency lighting with sensors
For communication via KNX EIB with electronic ballasts (ECG) with a DALI interface
DALI outputs acc. to IEC 62386 each for communication with up to 64 DALI ECG and at least 10 sensors
Integrated power supply with input voltage AC 110-240 V 50-60 Hz or DC 120-240 V for powering the gateway electronics and DALI output
Maximum DALI output voltage of 19 V short circuit resistant
Incorrect voltage detection during commissioning whether incorrect power line is connected to a DALI output
LED display for displaying operation mode and error messages
Pushbutton for switching between bus and direct operating mode
One pair of push buttons for switching On/Off of all connected DALI ECG
One LED per DALI output for status signal of all connected luminaries in direct mode
Configurable assignment of max. 64 DALI ECG per channel to max. 16 DALI groups per channel exclusive controlled in groups or single (switching dimming set dimming value) and feedback for group status and lamp failure
Configurable behaviour for bus failure (stand-alone mode)
Configurable pre-loaded applications without software (ETS)
Configurable function burn-in for all ECG via pushbutton or single via object
Scheduler for day week date and additional astro function
Control (switching dimming set dimming value) of all connected luminaries together in broadcast mode
Status signal and display of lamp and ECG failure per group and per DALI device
Transformation of dimming commands into a temporary set point adjustment for ECG with integrated constant light level control and directly connected light level sensor
One or two level timer

Other SIEMENS Building Technologies products

Gamma building controls