metal fastening system / for facade cladding / exterior
SISTEMA MASA SL
for facade cladding
Special clip for panel cladding on masonry walls, half carrying, designed for medium loads, longitudinally ribbed in order to provide higher strength and stiffness. The connection to the supporting element is carried out by the execution of a drilled hole with a diameter of approximately 30/35 mm for models GR-AM-V and GR-AM-R and of 8/10mm for the model GR-AM-H. Subsequently, the waste material is to be removed, realizing a mortar filling (preferably with non-shrink additives).
The connection to the panel cladding for the model GR-R-AM is made by a circular cut in the thickness of the panel and through the introduction of a clip with a forward bending (see description). In the models GR-AM-V and GR-AN-H the connection is made through a drilled hole in the thickness of the panel and the subsequent introduction of a push rod. In all three cases it is necessary to fill the rear side of the panel with MCP-mortar (or similar), according to specifications.
In the case of model GR-AM-NEW a more discreet anchoring (visible or hidden) has been achieved for the use with porcelain materials, with a similar anchoring application as the one for GR-AM-R. In all four cases it is necessary to fill the rear side of the panel with MCP-mortar (or similar), according to specifications.
Special version for masonry façades
Suitable for all enclosure walls
Machining with drilling and slots