Epoxy resin flooring / industrial / smooth / concrete look
Waterborne transparent epoxy product (A+B)
Waterborne 2 component epoxy product,
based on amine and epoxy resins.
The product has a high solids content: the
viscosity can be lowered by diluting with
The film has good mechanical properties and
good resistance to solvents.
Transparent finishing on indoor floors.
Primer for resin coatings.
Dustproof primer for concrete surfaces.
For making resinous coverings which have
been reinforced by glass fiber.
The substrate must have a minimum
resistance to compression of 25 N/mm2 and
to traction of 1,5 N/mm2.
Preparation of the substrate
• Concrete substrate have to be solid, dry
(seasoned time have to be respected when
new), leveled, absorbent, not polluted by oils,
cleaners, dust or any other substances.
Choose the most convenient mechanical
preparation (abrasion or shot-blasting).
Highly absorbent and not polluted surfaces
can be directly treated, but before doing so
they have to be carefully cleaned up.
Eventual holes or little cracks can be fixed
with PAVIRAPID or SIVITCOL.
Put the 2 compounds in one container and
mix them carefully for at least 2 minutes by
using a drill mixer.
Let the product de-aerate for a while, then
add slowly, while continuous steering gently,
the dilution water and mix it for at least 1
minute and apply quickly.