Decorative wooden panel: MDF (for furniture)
MDF MXL®
SPANOLUX
Scope
Moisture resistant light MDF board for use in humid conditions for general use in non-load bearing applications.
Description
Low-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for general, non-load-bearing applications in humid conditions. Umidax Light can be refined with paper, melamine, veneer, laminate or lacquer. The board is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
Use of the product
The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3. During and especially after installation the boards must be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than MDF Standard, meaning that an expansion space must be provided for at all times. Use suitable sawing, milling and drilling tools. Umidax can be used for walls and interior decoration. In service class 2, corrosion resistant fittings must be used, e.g., galvanised steel. Nails or screws should be kept at least 8 mm away from the edge of the board.
Moisture resistant light MDF board for use in humid conditions for general use in non-load bearing applications.
Description
Low-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for general, non-load-bearing applications in humid conditions. Umidax Light can be refined with paper, melamine, veneer, laminate or lacquer. The board is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
Use of the product
The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3. During and especially after installation the boards must be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than MDF Standard, meaning that an expansion space must be provided for at all times. Use suitable sawing, milling and drilling tools. Umidax can be used for walls and interior decoration. In service class 2, corrosion resistant fittings must be used, e.g., galvanised steel. Nails or screws should be kept at least 8 mm away from the edge of the board.
