Rigid expanded polystyrene insulation panel for walls
FULFIL Springvale

Efficient, effective cavity wall insulation that fulfils all your thermal requirements Springvale Fulfil is a tightly interlocking cavity insulation panel individually moulded from lightweight closed cell EPS to provide a fast, efficient and cost-effective solution to insulating new masonry walls.
It is available in original white EPS or as Platinum, to provide even higher insulation values. Platinum Fulfil is an EPS board which incorporates a graphite component called Neopor®, manufactured by BASF to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
Springvale Fulfil products are suitable for use in new buildings up to and including 12 metres in height. Fulfil boards are effective in achieving the required U-value of new external cavity walls with masonry inner and outer leaves.
The Springvale Fulfil concept was developed in conjunction with the Building Research Establishment and in consultation with NHBC. Fulfil boards are tongued and grooved on all four edges to provide tightly interlocking joints which prevent cold bridging and water penetration. On the external face, along the bottom edge of the board, a bellcast feature overlaps the top of the next board and protects the lateral joints by shedding water past the joint. A series of 5 or 10mm water %u2018run-off%u2019 angle fillets on the external face of the panel direct any water which has penetrated the external leaf of the wall down the face of the fulfil panels and back onto the outer masonry leaf.