Active chilled beam PRIMO

Climate system for installation along a perimeter wall A complete climate system for placement along a perimeter wall. High capacity and small space requirements. Prefabricate parts promote uncomplicated installation. Modular designed units offering immense flexibility. Adapted for new building and renovation projects as well as replacement of existing induction units. Completely PVC-free Systems Lining PRIMOFRONT Classic Visible outlets in conduit Free placement of partitions Free placement of outlets The flexible design and the possibility to position wall blocks between each module means that placement of partition walls can be decided at a later stage. Naturally, this method even lets you change the placement of the partition walls after the system has been commissioned. The casing is manufactured in galvanized sheet steel (zinc plated) Grills are in prepainted sheet steel and aluminum RAL 9003, Coil is in copper and aluminum. The prefabricated pipe system is suspended on the mounting rail by the means of brackets and secured. You can choose between first installing the complete pipe system by itself and then installing the units or fit the units as the installation of the pipe system progresses. Associated valve assemblies with hoses (Ø 12) are easily installed using quick action couplings and join the unit with the distribution pipe. Connection respective termination fittings are installed at the beginning and end. Electrical trunking, perimeter casing and supply air grille are fitted in position after which the room regulator is connected to the snap-in terminals on the unit's connection card.