Mullion and transom curtain wall
(aluminium and glass) TECHNAL

6mm to 42mm glazing available as a flat façade or faceted up to 20°.
Specific version for single glazing from 6 to 10.80mm.
Superior load distribution with less deflection across the transoms, allowing the system to hold large, heavy glazing units.
Projecting top hung open-out, and tilt/turn concealed vents for natural ventilation whilst maintaining an uninterrupted flat façade.

Construction
The mullions and transoms are square cut and assembling using a combination of cast face-fixed junction spigots and concealed anti-rotation spigots for ease of fabrication.
The faceted glazing option uses a standard cast face-fixed spigot for a facet of +-10°, and a transom block with specially designed pressure plate, caps and adaptators for 10° to 20° facets.

Weather Performance
The MX visible grid system is thermally isolated using a 34mm TPE thermal break between the pressure plate and mullion or transom.
This ensures a superior thermal performance in line with the required building level to achieve.
A pressure plate holds the infill in place with a combination of EPDM gaskets and allows for zone drainage with pressure equalization using punched slots into the pressure plates and caps.

More information...