Fast, pourable and strong repairs for deep holes
For holes between 10-200mm
Just add water, mix and pour
Fibre reinforced for added strength
Forklift traffic in just 2 hours
Watco Flowpatch Deep Fill® is ideal for repairing or levelling deeper holes between 10-200mm in concrete flooring. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.
Recommended areas of use
Ideal for filling deep holes between 10-200mm
For quick patch repair on concrete, use Watco Flowpatch®
For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex®
For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop®
Features
Just add water, mix and pour
Can be applied to damp (not wet) concrete
Sets at low temperatures (down to 5°C)
Flowpatch Deep Fill® can be applied from feather edge to 200mm
Light grey, slip resistant finish
Odourless, non-toxic, non-hazardous formula
Fibre reinforced
Properties - Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures.
Suitable for - Concrete
Interior or Exterior - Interior and exterior
Primer required - No primer required.
Composition - Reinforced cement & polymer powder
Coverage - Approximately 0.25m² at 50mm thick per 25kg
Curing time - 1 hour at 15°C
Minimum application temperature - 5°C