Liquid epoxy resin floor covering WATCO CHEMI-COAT
waxedwaxed concrete looknon-slip

liquid epoxy resin floor covering
liquid epoxy resin floor covering
Add to favorites
Compare this product
 

Characteristics

Materials
liquid epoxy resin
Finish
waxed
Appearance
waxed concrete look
Technical characteristics
non-slip

Description

A high build epoxy resin with excellent chemical resistance Only one coat required Suitable for walls and floors Takes heavy traffic High resistance to aggressive chemicals Watco Chemi-Coat® is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30°C surface temperature) Coverage approx. 18m² per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient Properties - Excellent resistance to many chemicals, low solvent content, high build epoxy resin, excellent durability. Suitable for - Concrete, well bonded paint, some metals Finish - Glossy, smooth Interior or Exterior - Interior Primer required - Yes on very porous surfaces. Composition - 2 part, 100% solids epoxy resin Coverage - 18m² per 4L Number of coats - 1 Dry film thickness - 220 microns Curing time - 16 hours at 20°C Minimum application temperature - 15°C Pot life - 1 hour at 15°C.

VIDEO

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.