Liquid epoxy resin floor covering WATCO GRIP-MASTER

texturedflagstone looknon-slip

Attractive non skid finish for heavy wear areas Epoxy resin coating topped with attractive skid resistant aggregate Applied as one high build coat Excellent slip resistance Takes heavy traffic including forklifts Watco Grip-Master provides a safer, anti slip finish for vehicles and pedestrians. The new formula uses a rapid curing coloured epoxy resin binder which holds an attractive, similar coloured anti slip aggregate. The area can be opened to traffic after only 4-6 hours in reasonable drying conditions. Recommended areas of use Concrete Tarmac Asphalt Flat steel Apply by roller to ramps, walkways (not steps), vehicle areas etc. Features Applied as one high build coat Extremely high slip resistance for vehicles and pedestrians Highly visible surface Virtually solvent free formula Withstands forklift trucks Surface preparation Watco Grip-Master may be applied to concrete, stone, smooth metal, asphalt and wood. New concrete surfaces should be at least 1 month old, new asphalt at least 3 months old. Surfaces should be clean and dry. Remove loose and friable material using a wire brush or scarifying machine for larger areas. Sweep or vacuum to remove debris. Grease and oil patches should be removed mechanically or using Watco Bio-D or similar degreasant. Damaged concrete surfaces can be patch repaired using Watco Concrex.