Repair mortar WATCO FLOWPATCH®

restorationfixingprotective

Fast, pourable and strong repairs for heavy wear areas Easy to use rapid dry formula Takes forklifts in just 2 hours Just add water, mix and pour Fibre reinforced for added strength Flowpatch® is an easy to mix pourable material, ideal for quick repairs to level concrete, inside or outside. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application. We recommend Watco Flowpatch Deep Fill® for repairing or levelling deeper holes between 10-200mm in concrete flooring. Recommended areas of use - Ideal for filling deep holes before screeding with Watco Flowtop® - For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex® - For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop® Features - Just add water, mix and pour - Can be applied to damp (not wet) concrete - Sets at low temperatures (down to 5°C) - Flowpatch® can be applied from feather edge to 100mm - Light grey, slip resistant finish - Odourless, non-toxic, non-hazardous formula - Fibre reinforced Properties - Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures. Suitable for - Concrete Interior or Exterior - Interior and exterior Primer required - No primer required. Composition - Reinforced cement & polymer powder Coverage - Approximately 0.5m² at 25mm thick per 25kg Curing time - 1 hour at 15°C Minimum application temperature - 5°C