Repair mortar WATCO FLOWPATCH® TIEFENFÜLLER

levelingfor concretefor flooring screed

Fast, pourable and strong repairs for deep holes For holes between 10-200mm Just add water, mix and pour Fibre reinforced for added strength Forklift traffic in just 2 hours Watco Flowpatch Deep Fill® is ideal for repairing or levelling deeper holes between 10-200mm in concrete flooring. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application. Recommended areas of use Ideal for filling deep holes between 10-200mm For quick patch repair on concrete, use Watco Flowpatch® For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex® For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop® Features Just add water, mix and pour Can be applied to damp (not wet) concrete Sets at low temperatures (down to 5°C) Flowpatch Deep Fill® can be applied from feather edge to 200mm Light grey, slip resistant finish Odourless, non-toxic, non-hazardous formula Fibre reinforced Properties - Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures. Suitable for - Concrete Interior or Exterior - Interior and exterior Primer required - No primer required. Composition - Reinforced cement & polymer powder Coverage - Approximately 0.25m² at 50mm thick per 25kg Curing time - 1 hour at 15°C Minimum application temperature - 5°C