Fundo Riofino is a floor-level shower element with a channel drain. It allows the shower water to drain away in the middle in a narrow line. The required slope is already incorporated into the floor elements.
The tileable floor units are not only highly practical and reliable, they have opened up a whole new world of design possibilities for wet rooms and bathrooms.
Certainty thanks to a uniform predefined slope
Entire system is 100% waterproof
Simple and safe to work with - tested by those in the trade
For impact sound insulated floor structures, installation of impact sound insulation under wedi Fundo and perimeter isolation strips should be planned: Construction using wedi Nonstep Plan impact sound deadening boards. Alternatively, approved polythene membranes may be used.
wedi Fundo Riolito / Riofino floor elements can be cut to size on site, but the geometry of the elements should be maintained and they should not be shortened by more than 30 mm on the inside of the channel.
Material - XPS
Long-term compressive strength (50 years)
≤ 2% compression EN 1606 - 0.08 N/mm²
Compressive resistance at 10% compression EN 826 - 0.25 N/mm²
Thermal conductivity EN 13164 - 0.036 W/mK
Bulk density EN 1602 - 32 kg/m³
Temperature limits - -50°C / +75°C
Reaction to fire EN 13501-1 - E
Waterproof tested to - 1.5 bar
Wheelchair load-bearing from minimum tile size - 50 x 50 mm
Glass mosaic from minimum size - 20 x 20 mm
Minimum foundation height depending on the drain:
horizontal drain, DN 50 130 mm
vertical drain, DN 50 - 50 mm
Surface slope (from outer edge of Fundo Riolito/Riofino
floor element to outer edge) - 15 mm