|
|
STACKABLE MOBILE PARTITION WALLS
ANAUNIA's stackable mobile partition walls are suitable for any type of building layout, for the division of space inside gyms, sports centres, exhibition stands, commercial and industrial warehouses and so on.
They carry a quality guarantee, thanks to technical installation staff with over ten years' experience, and to the CE certification of compliance with the Machinery Directive.
ANAUNIA's stackable mobile partition walls can be used in an infinite variety of differently designed spaces and in situations where multi-functional space is a social and economic requirement. ANAUNIA's own leatherette material is a guarantee of quality, having obtained class 1 fire-resistance certification.
|
|
|
ANAUNIA Residential line of Movable Partition Walls offers the ideal way of separating one room both physically and acoustically into two or more independent domestic areas: kitchen-sitting room, living room-study, living-sleeping areas. They are composed of independent panels which slide along an aluminium guide rail fixed to the ceiling without the need for a track or guide rail along the floor.
|
|
ANAUNIA moving glass partition walls (PMC) are made from mobile glass panels and are the ideal solution for teaching centres and conference rooms and the division of waiting areas in airports and stations, entrance areas in banks, post offices and so on. The top and bottom locking and supporting edges of the door panels close along the whole width.
The structure is such that the glass need not be broken, rendering its life longer, and eventual repair work minimal. The covers for the top and bottom locking and supporting edges can be fixed using a clip. In this way surfaces are protected from both damage and scratching during assembly.
|
|
|
|
|
|
ANAUNIA moveable soundproof glass partitions offer the solution to the most difficult requests from architects to plan innovative offices, or for flexible ways of working in well-lit, functional and contemporary environments.
The ANAUNIA system is formed of independent glass panels inserted into an aluminium frame which, owing to the smooth gliding mechanism along ceiling-mounted tracks, fixes into position almost invisibly. The panels are opened, closed and soundproofed by a handle-operated system, which allows the upper and lower buffers to move. When the doors forming part of the panel slide into the unit, they are also transparent
The absolute transparency and the minimal space they occupy does not reduce the quality of the soundproofing (up to Rw = 42dB) by using different types of glass, including security room glass from 6 to 33 mm in width
The design and integration with the surrounding environment can also be improved by the opportunity include Venetian blinds, hand-operated or solar-powered blinds, and different grades of tinted glass.
The wide range of thicknesses don’t limit the availability, in place of glass, panels of different materials in an infinite variety of finishes, thereby changing the planned destination from shop to restaurant, or from house to office.
|
|
|
|
|
|
ANAUNIA moveable soundproof glass partitions offer the solution to the most difficult requests from architects to plan innovative offices, or for flexible ways of working in well-lit, functional and contemporary environments.
The ANAUNIA system is formed of independent glass panels inserted into an aluminium frame which, owing to the smooth gliding mechanism along ceiling-mounted tracks, fixes into position almost invisibly. The panels are opened, closed and soundproofed by a handle-operated system, which allows the upper and lower buffers to move. When the doors forming part of the panel slide into the unit, they are also transparent
The absolute transparency and the minimal space they occupy does not reduce the quality of the soundproofing (up to Rw = 42dB) by using different types of glass, including security room glass from 6 to 33 mm in width
The design and integration with the surrounding environment can also be improved by the opportunity include Venetian blinds, hand-operated or solar-powered blinds, and different grades of tinted glass.
The wide range of thicknesses don’t limit the availability, in place of glass, panels of different materials in an infinite variety of finishes, thereby changing the planned destination from shop to restaurant, or from house to office.
|
|
|
|
|
|
ANAUNIA's movable sound-proof partition walls enable variable configurations of space partitioning for the most logical and effective use of available space. A high level of practicality is evident when moving and locking the panels into place, due to their high-quality components.
They make use of vertical inter-locking design features and are designed to achieve perfect visual and geometric continuity and total sound-proofing. Telescopic elements are placed at the top and bottom of the panels in order to seal the gaps between the panel and the floor/ceiling. Doors are built into the panels and do not exceed the width of the panel.
They are available in different styles, in single or double leaf. Locking the panels into position, and unlocking them is quick and easy thanks to the mechanical system and handle. The panels are moved easily along the solid single and double ceiling rails, rendering a floor rail unnecessary. Stacking away the panels is extremely easy, and is usually done out of sight.
Colours and finishes are an important final part of the design. ANAUNIA offers both standard solutions and an unlimited range of tailor-made solutions, using finishes in wood, laminates, furniture upholstery, mirror, synthetic materials and so on, in the colours and patterns requested..
|
|
Both elegant and functional, the Sittris SiliformTM AL has polished aluminum legs and is available with silicone covered flared stand assist arms, polished aluminum looped arms or armless. Sittris SiliformTM AL is ideal for patient's rooms, lobby areas, clinics and training rooms.
|
|
Both elegant and functional, the Sittris AL has polished aluminum legs and is available with urethane covered flared stand assist arms, polished aluminum looped arms or armless. Sittris AL comes in a low- back or mid-back design and is available upholstered in either of our anti-bacterial advanced technical textiles, Microcare or Sustain. Sittris AL is ideal for patient's rooms, lobby areas, clinics and training rooms.
|
|
|
|
|
|
Design: Kai Stania, Christian Horner, Johannes Scherr
Not just a piece of furniture but also a sculpting element. Its appeal lies in its elegance and individual design.
A chair that leaves plenty of room to move; ideal for long periods of comfortable sitting such as during meetings, conferences and executive functions.
Its classic design creates a self-confident look using a distinctive backrest adorned with decorative stitching on the back. A chair whose appeal lies in the sophisticated combination of aluminium and leather/fabric elements.
Distinctive asymmetrical 4-legged frame with oval cross-section, featuring the characteristic AL_Group design. A piece of furniture that complements the AL_Group portfolio, while also
shining in combination with other Bene furniture.
Polypropylene frame straps and upholstery ensure comfortable sitting. Elastic backrest, lumbar support.
Leather or fabric cover. Shot-blasted aluminium with clear varnish.
Oval frame, anodised aluminium, 20 x 42 mm. Glides.
|
|
Both elegant and functional, the Sittris SiliformTM AL has polished aluminum legs and is available with silicone covered flared stand assist arms, polished aluminum looped arms or armless. Sittris SiliformTM AL is ideal for patient's rooms, lobby areas, clinics and training rooms.
|
|
Both elegant and functional, the Sittris AL has polished aluminum legs and is available with urethane covered flared stand assist arms, polished aluminum looped arms or armless. Sittris AL comes in a low- back or mid-back design and is available upholstered in either of our anti-bacterial advanced technical textiles, Microcare or Sustain. Sittris AL is ideal for patient's rooms, lobby areas, clinics and training rooms.
|
|
Thermo isolation under-roofing of cover
EUROTHANE Al Straw L is a panel of heat insulation with a heart
out of rigid foam polyurethane covered, on two faces, with a multi-layer facing
color straw.
Scope of application:
Agricultural buildings.
Agro-alimentary buildings.
Profitability of the breeding and storage.
Facilitate maintenance.
Simple and fast installation.
Dimensions panels: length with the request up to 12 Mr.
Width: 1200 mm flat rims or grooved matched or rabbets.
Thicknesses: 70-80-90-100-110-120 Misters.
Behavior in fire: Euroclasse F.
Thermal coefficient of conductivity: Al Straw L: 0,025 W/m.K.
Regulation:
ACERMI n°03/003/125 AL Paille LL
DTU series 40.30 and 58.1.
Implementation: During their fixing, the panels will be well applied the ones against the others so as to ensure an installation on jointed board to avoid the thermal bridges. The assembly will be done with sections H universal or sections H Profisol Paille corresponding to the thickness of the panels.
|
|
Thermo isolation under-roofing of cover
EUROTHANE Al Straw is a panel of heat insulation with a heart
out of rigid foam polyurethane covered, on two faces, with a multi-layer facing
color straw.
Scope of application:
Agricultural buildings.
Agro-alimentary buildings.
Profitability of the breeding and storage.
Facilitate maintenance.
Simple and fast installation.
Dimensions panels: length with the request up to 12 Mr.
Width: 1227 mm rebordé grooved over the length,
Thicknesses: Al Straw: 30-40-50-60 Misters.
Behavior in fire: Euroclasse F.
Thermal coefficient of conductivity: Al Straw: 0,028 W/m.K,
Regulation:
ACERMI n°03/003/123 AL Paille,
DTU series 40.30 and 58.1.
Implementation: During their fixing, the panels will be well applied the ones against the others so as to ensure an installation on jointed board to avoid the thermal bridges. The assembly will be done with sections H universal or sections H Profisol Paille corresponding to the thickness of the panels.
|
|
Thermo isolation under-roofing of cover
EUROTHANE Al Straw L is a panel of heat insulation with a heart
out of rigid foam polyurethane covered, on two faces, with a multi-layer facing
color straw.
Scope of application:
Agricultural buildings.
Agro-alimentary buildings.
Profitability of the breeding and storage.
Facilitate maintenance.
Simple and fast installation.
Dimensions panels: length with the request up to 12 Mr.
Width: 1200 mm flat rims or grooved matched or rabbets.
Thicknesses: 70-80-90-100-110-120 Misters.
Behavior in fire: Euroclasse F.
Thermal coefficient of conductivity: Al Straw L: 0,025 W/m.K.
Regulation:
ACERMI n°03/003/125 AL Paille LL
DTU series 40.30 and 58.1.
Implementation: During their fixing, the panels will be well applied the ones against the others so as to ensure an installation on jointed board to avoid the thermal bridges. The assembly will be done with sections H universal or sections H Profisol Paille corresponding to the thickness of the panels.
|
|
Thermo isolation under-roofing of cover
EUROTHANE Al Straw is a panel of heat insulation with a heart
out of rigid foam polyurethane covered, on two faces, with a multi-layer facing
color straw.
Scope of application:
Agricultural buildings.
Agro-alimentary buildings.
Profitability of the breeding and storage.
Facilitate maintenance.
Simple and fast installation.
Dimensions panels: length with the request up to 12 Mr.
Width: 1227 mm rebordé grooved over the length,
Thicknesses: Al Straw: 30-40-50-60 Misters.
Behavior in fire: Euroclasse F.
Thermal coefficient of conductivity: Al Straw: 0,028 W/m.K,
Regulation:
ACERMI n°03/003/123 AL Paille,
DTU series 40.30 and 58.1.
Implementation: During their fixing, the panels will be well applied the ones against the others so as to ensure an installation on jointed board to avoid the thermal bridges. The assembly will be done with sections H universal or sections H Profisol Paille corresponding to the thickness of the panels.
|
|
Model: AL-JUMRA
Author: Alpujarreña
Quality: Hand Weaved
Materials: Linen warp, Jute weft and 100% Pure New Wool
Handmade in Spain
Available in any Size and Colour Combination
|
|
Keypad without LCD, "Alumnium" ABS/PC plastic with gray buttons with IR receiver, internal speaker and microphone.
Keypads are used to
- Arm and disarm the security system
- Record or hear voicemail messages
- Control Comfort through the Home Control Menu.
- Intercom with other keypads, Door stations, and telephone
- Receive infrared commands from RC01 and other remote controls
- Hear Alarm sounds (sirens)
- Activate short cut functions
EN50131 compliant. Up to 8 keypads in a system.
|
|
Hi-power LED Downlight for Jewelry and Showcase
It creates spectacular visual, boost the beauty and color for jewelry pieces and gem with maximun glitter.
Model no: AL-SPOT-LED-3AD
Dimension: Ö38 x H.39mm
Cut out: Ö33mm
Light source: 1x3W hi-power LED
Current: 700mA
Color temp: 3000K, 4000K, 6300K
Casing Aluminum, turnable lamp head
|
|
Model: AL-JUMRA
Author: Alpujarreña
Quality: Hand Weaved
Materials: Linen warp, Jute weft and 100% Pure New Wool
Handmade in Spain
Available in any Size and Colour Combination
|
|
... see all the products in the category
Plain rugs
|
|
|
|
|
The illumination level along the centre line of the escape
routes should not be less than one lux. In some cases,
it is not possible to integrate the emergency lighting
into the already existing lighting system. In other cases,
because of technical and safety reasons, the emergency
lighting must be installed separately from the mains
lighting. For such applications we offer the AL range of
LED-spotlights. These lamps can be mounted on or into
the ceiling either as a surface or as a recessed fitting.
In the model for evacuation lighting, the LED are disposed
in such a way that the light is distributed over the
longitudinal axis of the escape route.
The model for orientation lighting is designed so that the
light is distributed in all directions over the circulation
route. In both cases, the suspension height must not
exceed 2.50m. The lamp is available either with individual
battery, or with group battery or for use with central battery
systems. It comes in two versions for 24 Volts or 230
Volts AC/DC connection.
|
|
Hi-power LED Downlight for Jewelry and Showcase
It creates spectacular visual, boost the beauty and color for jewelry pieces and gem with maximun glitter.
Model no: AL-SPOT-LED-3AD
Dimension: Ö38 x H.39mm
Cut out: Ö33mm
Light source: 1x3W hi-power LED
Current: 700mA
Color temp: 3000K, 4000K, 6300K
Casing Aluminum, turnable lamp head
|
|
Planet™
Designer: Sven Ivar Dysthe
Year: 1965
Sven Ivar Dysthe developed the Planet™ in 1965 and it now appears as part of the Varièr range – still as elegant and user friendly – yet now with functional improvements that make it even more comfortable and functional than before.When re-launching Planet™ a unique and patented mechanism was added. The mechanism allows you to tilt the seat adding a new dimension to the movement of the Planet™.
You can tilt forwards and backwards, the chair follows your body. The patented tilting mechanism ensures comfortable sitting with smooth changing of positions. You can lean forward, sit upright at ease and lean backwards when you need to stretch. You are able to move freely; easily change sitting positions and achieve the freedom and movement necessary to feel relaxed and comfortable.
|
|
FIRE RESISTANCE
The software for the thermal analysis and the verification of resistance to the fire concurs to carry out the thermal analysis and the verification of resistance to the fire in the respect more prescrittivi codes. The thermal analysis happens to ended elements of composed sections from any material, under the action of the fire. To they of the thermal analysis goes, for sections in c.a and c.a.p., she is proceeded to the verification of the carrying ability.
|
|
Hi-power Downlight for Jewelry and Showcase
It creates spectacular visual, boost the beauty and color for jewelry pieces and luxury commodities with maxminum glitter.
Model no. AL-SPOT-LED-5X1AC
Dimension: Ö157.5 x H. 32mm
Cut out: Ö152mm
Light source: 5x1W hi-power LED
Current: 350mA
Color temp: 3000K, 4000K, 6300K
Casing: Aluminum
Remark: 4 movable heads, 1 accent spot
|
|
Structure of a two-shell
Alu /Alu Sandwich element
Typ AL-WS (plug joint):
surface: ruled on both sides
sheet thickness: 0,65 mm
standard colours: grey white
metallic silver
light ivory
Typ AL-WV (concealed joint):
surface:
ruled and beaded on the outside
ruled inside
sheet thickness:
0,65 mm
standard colours:
grey white
light ivory
metallic silver
|
|
FIRE RESISTANCE
The software for the thermal analysis and the verification of resistance to the fire concurs to carry out the thermal analysis and the verification of resistance to the fire in the respect more prescrittivi codes. The thermal analysis happens to ended elements of composed sections from any material, under the action of the fire. To they of the thermal analysis goes, for sections in c.a and c.a.p., she is proceeded to the verification of the carrying ability.
|
|
Art. MB31
Silhouette Piece of Furniture, natural finish (50x45x156h cm)
This elegant, functional piece of furniture has slender, sinuous lines. Its image features a geometrical, stylised walnut, cherry wood and briarwood inlay with ebony inserts. The upper part is closed by a flap which hides niches, little drawers and a useful extractable shelf, also with ebony inlay and edging. A series of spacious drawers complete the piece. It has a secret compartment. It also comes in the classic walnut colour version.
Art. MB32
Ebony Silhouette Piece of Furniture (50x45x156h cm)
The same piece comes in an ebony version with mother-of-pearl decoration. It also has a secret compartment.
|
|
MADAME-AL
Design: Stefano Bettio
Anodized or mirror finish or pownder painted alluminium chair .
|
|
|
|
see the results for the following category : 
