35x35 cm tiles

Thickness: 2 mm

... The items in the Marmo Matt collection, 1 cm thick, are honed, with an opaque finish, and supplied in a ready-to-install units glued to paper mesh backing, with 2 mm grout lines. ...

Thickness: 10.5 mm

... the beautiful three-dimensional effects of the Shapes and the delicate graphics of the decors inspired by ancient cementine tiles or by geometric patterns. ...

... Il Cotto Beige 35,5× 35,5 Il Cotto Rosso 35,5× 35,5 ...

... 20×45 Beige Listello 20×45 Beige 35,5× 35,5 Beige Gres Porcellanato 20×45 Grigio Listello 20×45 Grigio 35,5× 35,5 Grigio Gres Porcellanato ...

Thickness: 1.4 cm - 1.6 cm

Extruded terracotta with rustic surface, known and used for decades owing to its particular brushed finish. This category is constituted by a wide range of products which have contributed to spreading the image of Tuscan tradition throughout the world. ...

Thickness: 1.4, 1.5 cm

... Extruded terracotta tiles with a glazed (before firing) surface. No need to treat it after laying and grouting. 100% water proof. ...

Thickness: 1.5 cm

Extruded terra cotta obtained through a new procedure studied to create a soft, velvety finish. With Cotto Satinato a refined alternative to the Arrotato finish, reinterpreting a solid tradition in an original way, is offered. Achieved prior to firing ...

Thickness: 1.8 cm - 3.2 cm

The “Gigliato finish” (yellow) is obtained by blending “Turchina clay” and “Giglia clay”. The surface is rough and opaque with yellow tones and unmistakable reflections. As every pure Handmade Cotto each element looks unique and unrepeatable.

Thickness: 2.5, 3, 1.8, 3.2 cm

This semi-smoothed (Vellutato) surface is obtained by following a specific tecnique which consists of avoiding any sand under the wooden mould. The opaque light red colour which absorbs the light and throws out unmistakable reflections and tones, and ...

Thickness: 2.3, 3 cm

This “Anticato finish” is obtained with the traditional method of manual brushing before firing. Upon request a shaded version (Rinascimentale) is availble. Preferred use: interior.

Thickness: 2.5, 3, 1.8 cm

... This surface is obtained by following a special technique that allows the opposite side of the tile to be used. This results in a greater oxidation, in a lighter colour and in a wavy but soft surface. The small irregularities make each ...

Thickness: 1.8 cm - 3.2 cm

This handmade Finish is achieved by mixing manganese oxide into the clay. The result is a darker colour that tends to vary according to the percentage of oxide mixed into the clay: brown to a black color. The tone tends to be opaque with a very natural ...

Thickness: 1.5, 1.4, 1.2, 1.7 cm

Surface submitted to dry brushing, with rough grain, anti-slip with constant section. Typical color of Cottoimpruneta. Suitable for gluing and mortar laying. Single pieces are ready for laying, and double pieces are to be split on site.