Fans

Air flow: 9,000 m³/h
Weight: 39 kg
Width: 520 mm

Air flow: 1,230 m³/h - 7,800 m³/h
Noise level: 53 dB - 75 dB
Weight: 7 kg - 24.5 kg

... Centrifugal double-inlet fans with BUILT-IN motor and impeler with forward-facing blades •Galvanized sheet steel casing. •Impeller with forward-facing blades made from galvanized sheet steel. Motor •Class F closed motors with ...

Air flow: 0 m³/h - 280 m³/h
Noise level: 44 dB
Weight: 6.5, 7.2 kg

... The V5S fan can ventilate a complete dwelling: the 6 available side inlets can be connected to several exhaust units in the wet rooms. With its constant pressure, the fan is well suited to demand controlled exhaust units. ...

... SE Controls’ SHEVTEC® range of fans are designed to extract hot gases from corridors and lobbies via smoke shafts. All fan sets are tested to European Standard EN12101-3 and installed as part of a fire engineered solution. ...

Air flow: 68,223 m³/h
Noise level: 43 dB
Weight: 130 kg

... SUNON Portable HVLS Fan is designed to be easily move by a person through the work areas. 2M fan generates powerful airflow to enhance better ventilation and reduce human body temperature. Using SUNON BLDC motor not only ...

Air flow: 0 m³/h - 24,800 m³/h
Noise level: 68 dB - 91 dB
Weight: 11 kg - 160.5 kg

... compact fans are ideal with their high protection class IP65 and temperature stability. All compact fans are also available as stainless steel version (V2A/V4A). The maximum permissable ambient temperature is up to 80°C, ...

Air flow: 97 m³/h - 370 m³/h
Noise level: 25, 32, 38, 28, 33 dB
Weight: 1.33, 0.78, 0.55 kg

... ventilation shaft or connection to Ø 100, 125, 150 mm air ducts. The fan is equipped with a specially designed back valve to prevent back flow and heat losses during the fan standby. The fan exhaust ...

... The extractor fans allow forcing the ventilation inside greenhouses when the natural ventilation using roof and/or perimeter vents, does not allow reaching the desired rate of air renewal, which is an innate need for producing crops as ...

Width: 65 cm
Length: 65 cm
Power: 123 W

Air flow: 4,750, 8,000, 12,050 m³/h
Weight: 15.5, 19, 22 kg
Height: 486, 567, 650 mm

... Stainless steel housing IP 55 protection grade motor with thermalcircuit braker Three Aluminium blades Propeller Suspending brackets Double safety guard (motor side and blade side) Air flow rectifiers ...

Air flow: 0 m³/h - 5,000 m³/h

... poultry farms and greenhouses a good environment is essential for growth in any form. DXF fans contribute to this as they transport the warm air horizontally. DXF fans are an asset for a good internal climate and the ...

... Motor for machine with EC technology QUANTITY 1 UNITS/BOX ...

... Description The Twin Gamma Ultra Series of Mixed-Flow roof fans have been designed for use in commercial ducted exhaust applications. Incorporating twin vertical discharge fans, the unit provides 100% stand-by capacity. These ...

Air flow: 2,000 m³/h
Weight: 23.4 kg
Height: 215 mm

Air flow: 104 m³/h
Noise level: 45, 42 dB
Weight: 0.37 kg

... DOMESTIC DUCT FAN WITH AN ADAPTER TO EASY INSTALATION ...

... SPEED CONTROL - : - Speed can be adjusted using an optional Controller USES - : - Industrial applications, Duct fans, Roof fans, Centrifugal fans, Heat Exchangers, Air Handling Units, etc. ...

Noise level: 32 dB
Power: 25 W

... your home or while working in the office, it is time to buy a fan. In order to be able to concentrate, however, noisy fans are undesirable. If you are looking for an extremely quiet room fan, both ...

Air flow: 95 m³/h
Power: 5, 2 W

... Premium exhaust fan with intelligent odor sensor Unique sensor trio: odor, humidity and light sensor Simple & smart operation via the "inVENTer Mobile" app or directly on the touch panel Automatic basic ventilation adjustable Stylish ...

Air flow: 3,000 ft³/min
Noise level: 70 dB
Weight: 35.2 lb

... This heavy-duty air mover is a go-to for effective various tasks such as drying surfaces and providing proper ventilation. It is built with robust features that makes it a suitable unit for either residential or commercial uses. This, along with all ...

... CHARACTERISTICS: In-line duct fans CKM are designed and built for rapid and secure insertion in rectangular ducts. The fans are equipped with galvanized steel impeller single inlet with motor connected directly cooled ...

... mechanical ventilation system. UVO exhaust roof fans are dedicated both to commercial and industrial buildings. They can be used for operating with dry air; maximal pollution of air is 0,3 g/m3 • EC fans • ...

Air flow: 0 l/s - 95 l/s

Air flow: 9 l/s - 60 l/s

... • Designed to exceed the needs of Social Housing • Continuous running bathroom and kitchen fan • Extracts up to 60l/s - just two fans can exceed Part F rates for a 4-bed house • 5 or 7 year warranty options • ...

... For use in Washrooms Features: Low energy axial fan Slim compact styling Quick and easy to fit Quiet, 26 dB(A) Low specific fan power (0.29SFP) Powerful ventilation up to 70m3/hr Compatible with 100mm ducting CE, IPX4 ...

... The tried and true ventilation method in many areas is still a fan and pad mechanical system. This system will exhaust the hot greenhouse air through inlets and provide a cooler environment by pulling air through a wet wall. Other systems ...

Air flow: 200 m³/h - 19,000 m³/h

... centrifugal fan for low airflow rate. Maximum temperature 60 °C. Versions: CX BOX series with silenced box Construction: The external casing is made entirely of pressed zinc plated steel, painted with epoxy powders, backward blade ...

... Duct fans are really useful solution in many ventilation installations because of their easy construction, easy assembly and the low costs of construction and operation. They connect the advantages of axial and radial fans ...

Air flow: 130 m³/h - 3,400 m³/h

... Duct fans are used for supplying and exhausting air in ventilation ducts. Wide range of sizes and dimensions of duct fans allows for easy installation even in hard to reach places. ...

... AB Chimney Axial fan provides a powerful air flow by means of ideal blade angles. Motors with sintered sleeved bearings provide silent operation. Easy to install in walls and windows. Material Electrostatic powder coated DKP sheet body ...

... enclosed belt and ball bearing housing Adjustable motor base for proper belt tension Rugged cast aluminum blade, non-sparking Fan can be mounted to operate in any position 1 year limited warranty ...

Ideal for air-extraction in bathroom, toilet and small/medium premises. Suitable to extract stale air directly to the outside or through short length ducting. Units can be wall/panel, ceiling and window mounted.

... The fan has automatic power shutoff function in case of the motor jam. Low noise level due to specially designed fixation of the motor and the impeller on a vibration absorbing mount. The built-in slide switch makes it easy to disconnect ...

Air flow: 75 m³/h - 340 m³/h

... : The fan automatically starts when the humidity in the room is higher than the preset value, adjustable from 40% to 90%. PIR version: The fan automatically starts when the sensor detects a presence in the room. When ...

... Range of direct driven single inlet centrifugal ventilators with backward curved impeller. All models incorporate backward curved centrifugal impellers appropriate for transportation of air with dust elements up to 200mg/m3. Designed for work in non-aggressive ...

... Declaration of performance 007-05-CPR-2015 for F600. CE Declaration of conformity W/01/A/2012. Roof smoke exhaust fans type mcr Pasat with radial rotor are designed for removing smoke and hot air from rooms during fire, and ...

Air flow: 3,000 m³/h

... capacity of 3000m3/h. Axial fan AX3000 is robust and the light weight combined with the neat handle makes it easy to carry. It is easy to direct the air flow to the desired direction. The base is stable and ensures that the fan ...

Air flow: 1,600 m³/h

X-CYCLONE® Ceiling Module with a separation efficiency of up to 99.9999 %; flame-arresting capability tested in accordance with international standards; in closed, hygienic design, to prevent contamination of the building structure by the air flow; internal ...

Air flow: 500 m³/h - 7,800 m³/h

... motor direct coupled Supporting motor-board formed by proper soundproof cages and buffers Double aspiration centrifugal fan Fan fixing to the structure by vibrationproof joints. ...

... Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller. The motor and fan impeller are supported within this mounting plate by strong electrowelded steel ...