- Heating, Air Conditioning, Electricity >
- Heat pump, Ventilation, Air conditioner >
- Galvanized steel ventilation grill
Galvanized steel ventilation grills
Width: 10 mm
Length: 30, 20, 40 mm
... style Metal spring hooking > safe installation and easy maintenance Three sizes: 40x10cm, 30x10cm and 20x10cm > Suitable for environments of any size INTEGRA WHITE RANGE Two finishes > galvanized ...
... Agix® Dry system. FITT AGIX SQUARE DIFFUSION GRID INTEGRA Finish > galvanized steel white powder coated. Grids with a refined appearance, sturdy and unaltered over time. Metal ...
Width: 225 mm - 1,225 mm
... natural anodised (E6/C0) fins Horizontal front fins can be individually adjusted Standard components made of galvanised steel material, black enamelled Fixing by mounting frame with concealed turning bolt or by countersunk ...
... and exhaust air Aluminium, natural anodised (E6/C0) Horizontal, rigid front fins Standard components made of galvanised steel material, black enamelled Fixing by mounting frame with concealed turning bolt or optionally ...
Width: 125, 225, 325 mm
Length: 225 mm - 1,225 mm
stable ventilation grille for supply air and extract air Stable, ball impact-proof design (DIN 18032) Standard components made of galvanised steel material, black enamelled Natural anodised aluminium ...
Width: 315 mm - 1,215 mm
Length: 65, 115, 215, 315 mm
Can be used as a single grid or as an attached part for grids and outlets. Suitable for air flow rate adjustment for grilles and air diffusers. On request, the hit-and-miss damper can be supplied with a one- or two-sided flange.
Width: 12 in - 60 in
Length: 18 in - 198 in
Model GS-410 is a 4", 45 degree step blade, standard fixed formed galvanized steel, mullion louver.
Width: 150 mm - 1,000 mm
... white RAL 9003, other colours available on special order. Mounting frame K is made of hot galvanized steel sheet. Adjusting device S is made of hot galvanized steel ...
Description NOVA-F is a rectangular non-transparent aluminium grille with fixed blades and a galvanized steel box. It is adequate for usage in such premises that require a higher emphasis on appearance ...
Width: 150 mm - 2,300 mm
Length: 150 mm - 2,300 mm
... thickness 1,5 mm - mounting frame- thickness 2 mm - non anodised • construction in galvanised steel: thickness 1,5 mm • RAL colour upon request • stainless steel construction-thickness 1,2 mm Application ...
External acoustic louvre, Koolair brand, model 250-TAA (single thickness) and 250-TAAD (double thickness). Galvanized steel plate. Are used by introduction of fresh air or exhaust air discharge with attenuation ...
Width: 358 mm - 858 mm
Length: 113 mm
... number: 0151.0354 Manufacturer: MAICO LGR 32/6 - short description Internal grille for ventilation and air extraction for installation in ducts, sheet steel, galvanised, max. 200 m³/h LGR 32/6 ...
... MATERIAL AMT-… BMT-… …-AN Grille in extruded aluminium. …-N Grille in galvanised steel. ADDITIONAL ACCESSORIES SP Opposed blades volume damper from electrozinc steel, in black colour. The ...
Width: 100 mm - 500 mm
Length: 200 mm - 1,000 mm
... upon request (KC). ACCESSORIES: • Galvanized steel plenum, standard or insulated. • Calibration damper made of galvanized steel and fins with opposite movement. • ...
Width: 600 mm - 2,000 mm
Length: 500 mm - 2,500 mm
... air-regenerated noise All aerodynamic data is measured in aerodynamics and acoustics laboratories Variants made of galvanised sheet steel or aluminium Flexible arrangement of sections for covering large areas (should ...
Width: 13 mm
Length: 13 mm
... louvres and a wire mesh made of a 1 mm thick wire and mesh opening size of 12.7x12.7 mm. The vents can be installed in walls or at the ends of ventilation ducts. The product is made from galvanized ...
... Recovery Ventilation or HRV consists out of a mechanical ventilation system combined with a heat exchanger and air ducts. The heat exchanger in HRV systems uses the warmth of extracted indoor air to ...
Width: 100 mm - 600 mm
Length: 200 mm - 1,200 mm
... fins Version for vertical launch (UP0) or 15 ° launch angle (UP1) Damper contrasting galvanized steel can be provided separately (SCUP) Stainless steel galvanized ...
Width: 150 mm
Length: 150, 300 mm
Fire-rated intumescent louvers have been developped to allow air flow through the door. Those louvers have been manufactured with intumescent material, that expands at 85 ºC, sealing gaps and provinding an effective barrier against fire, ...
... on the grid, produced with clamps to be cemented and with brackets for fixing by wall plugs. All the elements are hot dip galvanized.
Your suggestions for improvement:
Receive updates on this section every two weeks.