Stainless steel fastening systems

A flat tension profile (tension strip) is equipped with clevis bolts. Using the bolts, the wire mesh element is suspended into the substructure. At the same time the bolts are used to apply tension at the top mounting point.

... incorporated into the mesh with the round rod. The cable mesh element can now be tensioned with a continuous angle iron or single fastening brackets.

For bottom mountings the use of flat tension profiles is recommended. Proper tensioning is achieved with clevis screws that are attached to the flat tension profile. Especially in exterior applications structural characteristics require ...

... diameter ø 5 mm Construction board discs, galvanized: ø 50 mm Internal diameter ø 5 mm Construction board discs, stainless steel: ø 36 mm Internal diameter ø 5.5 mm 5 pieces/m2

... board discs, stainless steel: ø 36 mm Internal diameter ø 5.5 mm 5 pieces/m2

... was installed with the Structusol system. This L-shaped material is made of stainless steel and you simply slide it into the aluminium slats of our Structusol system. The Inox L is ...

GENERAL CHARACTERISTICS: * Fittings for wood doors. * For floor springs with pivot C "Square Pivot 16/19" and/or CI "Italian Square Pivot 13/16".

GENERAL CHARACTERISTICS: Door Rail for glass doors with Standard glass thicknesses from 10 to 12 mm. Maximum width: 1100 mm. Maximum height: 2300 mm. Maximum weight: 120 kg. OPTIONS ON REQUEST: Different glass thicknesses. Different ...

... no visible and apparent fasteners -Robust and resistant to moisture Cobra Hybrid concept The Cobra® Hybrid 8-18 clip is a matte black dual-material fastener that prevents light reflections. Thanks ...

Bent, hook-shaped rods, made of AISI 316 material.

Metal profile, bolted and welded on both sides of the mesh, with mirror-polished finish. Fastening is accomplished by connecting the clevis screws to the flat bar, inserting the screws through the through-holes. ...

Continuous flat bar, linked to the mesh at the first and / or last spiral of the panel. Tensioners welded to the flat bar; all made of AISI 316 material.

A high level of safety The technical rules for the use of safety barrier glazing (TRAV) also allow planners and builders to design safety barrier glazing with point-fixed mounting in line with regulations. Therefore, point fixings approved ...

JK Technic fastening systems allow you to fix gratings to metal structures quickly and securely. The choice of fastening system type depends on various ...

... (or shoe) Finishes available: Galvanised double fastening system used to secure untreated steel or galvanised gratings. Stainless steel double fastening ...

... wide selection of fastening systems types that suit your every need. Stainless steel standard retaining fastening system is used to secure FRP stair ...

GFS offers a wide range of stand-offs. The “Giotto” stand-off stands out for its uniqueness: it is the only one in the market allowing the adjustment of glass depth, width, height and perpendicularity with the glass already mounted without ...

... /204Kg Stainless Steel AISI 316 2 legs at 90° Distance between centres 220 mm Stainless Steel AISI 316 3 legs Distance between centres 220 mm Stainless Steel AISI 316 4 ...

... specific calculation. Stainless steel wall-to-rod top connection Stainless Steel AISI 316 Stainless steel wall-to-glass bottom connection Stainless Steel AISI ...

The Kebony H-clip fixing system is designed for the hidden installation of Kebony Clear decking boards with side slits. The system gives a uniform 7 mm gap between boards and a 10 mm ...

The Korbo profile is designed to withstand façade masonry beside openings or overhangs, and to create a possibility of expansion wherever necessary. Korbo angle pieces with or without welded consoles can be visible or made invisible. ...

... Safe façade coating fastening system Minimum contact between the anchors and the load bearing structure, which reduces the thermal bridge Mechanical or chemical fasteners in concrete ...

length (in): 1-3/16, 1-9/16, 2, 3/4, 3/8 thickness (in): 3/8 diameter (in): 2-5/16 Surface: AISI 304, AISI 316 glass thickness (in): 1/2 shape: round thread strength (M): 12 connector: flat glass distance in mm: 80

length (in): 7 11/16 thickness (in): 3/8 diameter (in): 3-1/8 Surface: AISI 304, AISI 316 glass thickness (in): 9/16 shape: round connector: flat thread strength (M): 12 glass distance in mm: 80

height (in): 7 1/8 width (in): 2 13/32 diameter (in): 2-5/16 Surface: AISI 304, AISI 316 glass thickness (in): 5/8 - 1 1/4 shape: round connector: flat

General Material inox V2A Finish brushed Fixation to glue Sales unit (SU)unit MeasuresØ 42 / 1 - 100 mm Thread M8