Polyethylene adhesive strips

... chemical elasticized polyethylene perimeter strip with closed cells, composed of a vertical gray color part 6 mm thick and a horizontal white color part of 2 mm thick with pre-cuts to height 18, 16 and ...

A flat and adhesive perimeter strip in rolls, pre-cut at 5 cm from the base, with 15 cm maximum working height, it replaces the flap and is suitable for facilitating application of impact noise insulation products.

A flat and adhesive perimeter strip in rolls, ideal for applying mats beneath floors (ceramic and wooden) during restoration work, for detaching the floor from the wall. It is supplied in rolls with 5 ...

Adhesive tape made of expanded polyethylene used to seal the sound absorbing layer (Acoustic mat). It is supplied in rolls of 100-mm width and 3-mm thickness. Size: h 100 mm, l 25 m, th. 3 mm. Package: 25-m roll.

Single-sided tape made of polyethylene foil reinforced with polyester fibers and acrylic dispersion adhesive. Designed for sealing and repairing roof membranes, roof foils as well as ...

Single-sided tape made of polyethylene foil reinforced with stretchable polyester fibers and acrylic dispersion adhesive. Designed for sealing and repairing roof membranes and roof foils ...

Single-sided tape made of closed-cell polyethylene foam and coated with acrylic dispersion adhesive. Designed for use as sealing tape in roof and construction works. Elastic structure ...

Adhesive sealing tape made from closed cell expanded polyethylene, used to seal overlaps between adjacent sections of Mapesilent Band R, to cover the joint between Mapesilent Band R and ...

... Temperature resistant between − 40 °C and + 100 °C Can be torn by hand Robust kraft paper backing Stickers ideal for sealing injection holes

Cold-applied, self-adhesive tape with high moisture, climate and temperature resistance. Used to rectify minor damage and tape over joins between BWK underlays, including polyester-based products.

Special pre-cut strips of DELTA®-THENE for application to edges, corners, fillets, and pipe penetrations. Split non-stick backing paper ensures easy application. Ideal for edges, corners, fillets, and pipe penetrations. ...

BI-ADHESIVE NAIL POINT SEALANT MADE OF CLOSED-CELL POLYETHYLENEFOAM • Closed-cell polyethylene foam tape • Suitable for sealing nails or screws • Resistant to aging • Limited UV resistance ...

... the roof. It is a multifunctional adhesive tape, ideal for creating airtight seals between laps in underlays, vapour control layers and air barriers, repairing holes and tears in membranes and sealing ...

Description and use: butyl adhesive strip, 150 mm wide, 2 mm thick. Its top surface is coated with a flexible polyethylene film, while the bottom layer is protected by a liner cut lengthwise ...

1/32" thick white, closed cell, cross-linked PE foam has long term adhesion for multiple foam tape applications requiring a permanent bond. UV and chemical resistant. Also good for sealing against ...

Insulating gaskets in cross-linked polyethylene, one or double-sided self adhesive, for gypsum board metal structure on dry wall systems and ceilings. MATERIAL: Chemically cross-linked polyethylene ...

ME317 is a single-sided adhesive reinforced paper tape. For the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use. Also for joints in OSB boards and as an air-seal tape for penetrations. Usage/Purpose ME316 ...

Self-adhesive desolidarization accessories in closed cell expanded polyethylene. They include: PERISOL: strips in rolls with self-adhesive tape and protective tab ...

The single-sided high-performance adhesive tape Sicrall 60 is particularly suitable for permanent airtight sealing of vapour control layer overlaps in the interior. Also butt-joints between wood-based ...

A self-adhesive polyethylene band which ensures perfect sealing between the sound insulating covering and the perimeter walls Sound insulation sealant for ACUSTIC BAND flooring® Self-adhesive ...

Expanded cross-linked closed-cell polyethylene strips designed for easy installation. These strips come with a screen-printed side with the installation instructions. This product is ...

A separating strip about 5 mm thick made of adhesive polyethylene foam (AD) or non-adhesive foam with tape. The strip is used to prevent contact between ...

Insul-Joint™ Expansion Joint Filler is a flexible, lightweight material made from closed cell polyethylene foam. It offers many features not found in traditional fibrous materials, including a perforated peel-off ...

Self-adhesive sealing tape made of polyethylene closed-cell foam designed to seal the vapour-permeable roofing membrane in the places where it is in contact with rafter framing and counterbattens. For ...