Water-repellent coatings

SILICATRIA COATING SILICATE POTASSIUM TO RUSTIC TRANSPIRING PLASTER WITH HIGH RESISTANCE TO CLIMATE, AND STRONG WATERPROOFNESS TRANSPIRABILITY, STRONG MEMBERSHIP. INCREASES THE SURFACE HARDNESS. OUTDOOR RECOMMENDED PRIMER: ...

COVER WALL OUTDOOR RUSTIC SCRATCHED CONTINUOUS GRAIN 1.8 MM. SCRATCHED WALL COATING IS A GRAIN OF 1.8 MM OF A SYNTHETIC COPOLYMER EMULSION BASE DYES PIGMENTS FILLERS AND SELECTED SILICEOUS (A CONTROLLED PARTICLE). THE ...

Asbestos encapsulation coating. Coating formulated with special water-based resins, suitable for absestos-cement (eternit) encapsulation, according to current regulations. The product ...

... component coloured coating formulated with water-based acrylic resins, to be used as finishing layer on Sport flooring systems of Mat line, for multipurpose sport courts. Sportflex is a single-component ...

Synthetic coloured finishing coating formulated with water-based acrylic resins, for the realisation of cycle paths, skating rings, walkable areas and skate parks. Wheel Top is a one-component coloured ...

Concrete By Novacolor is an anti-algae acrylic-siloxane plaster coating for exteriors, fine grain (0,5-0,7 mm). Thanks to the acrylic binder and the siloxane component Concrete By Novacolor grants a big hardness of the ...

... suitable for interiors and exteriors subject to foot traffic both barefoot and with shoes, in the presence of humidity or water. Suitable for use in the residential and commercial sector.

Clear Finish Countertop Protection is a water-based bi-component protection coat for interiors, with high performances. Clear Finish Countertop Protection is suitable for the protection of various horizontal surfaces, ...

... a smoothing finish on surfaces where previously have been removed old coatings or paints. With a good water repellency and breathability of water vapor the finish ACRISYL FONDO FINITURA ...

ACRISYL KP 1 is an outdoor wall coating with an acrylic-siloxane binder base, excellent resistance to water and permeability to vapour, with a compact finish. It creates a rough layer resistant to the ...

ACRISYL KP 1,5 is an acrylic-siloxane binder based exterior wall covering that has good water vapour permeability, excellent water repellency and a compact effect. It creates a thick rough layer that ...

... surfaces. Usages Painting of concrete floors. Top Coating for resinous coverings. Anti-corrosion treatment for concrete and iron structures. Anti-dust filler for concrete and bricks structures. Coating ...

... PLATE IN ASBESTOS CEMENT. Acetovinyl copolymer in aqueous dispersion of red coloration. The product dries by evaporation of water, leading to the formation of a red film.

FLEXIBLE COLORED EPOXY COMPOUND SOLVENT-FREE (A+B). Two-pack product based on epoxypolyurethane resin in combination with ciclo aliphatic hardener. PAVIPLAST PARKING can be applied like selflevelling flooring or by scratch with quartz. Uses Resinous ...

Rouviere Collection microconcrete is applied as a trowelled coating with “béton ciré” effect. It is a perfect wall coating as well in dry environments as in showers, bathrooms, etc. Available in more ...

Extreme weather immunity █ High tolerance to humidity during application. █ All layers resistant to rain after 1 hour, irrespective of ambient temperature. █ Can be applied to many types of substrates, including asphalt, concrete ...

... mineral products in the field of waterproofing and coating of drinking water tanks. In the last 70 years Vandex has acquired a considerable amount of expertise in applying mineral based coatings ...

... cementitious, two-component, polymer-modified – and efflorescence-free surface waterproofer with hydrophobic properties. It is resistant to water and moisture, and made by mixing VANDEX BB 75 (dry component) ...

Two-component, colored, polyurethane coating without solvents, with excellent resistance to UV radiation. DUROFLOOR-PU is used as a coating on concrete floors, cement screeds, etc. Certified according ...

... in cases where the polyurethane waterproofing coatings are subject to pedestrian traffic and light vehicle traffic (e.g. park decks). Certified according to EN 1504-2 and EN 13813 classified as a coating ...

Fiber-reinforced, polymer-modified microcement coating, used both indoors and outdoors, for walls, and with the addition of ADIFLEX-B on stairs, and wherever a special aesthetic result is desired (e.g. Cycladic architecture). ...

Impregnated system product with water repelling and proofing features. Applied surfaces remains the same without decreasing its vapour permeability and damaging its natural look. It penetrares to the surface by even reaching ...

... the specialist placing the product you can achieve several finishes: textured or uniform, mineral aspect or tadelakt. This coating can participate in any décor: elaborate or simple, contemporary or classic. Ideal ...

... dehumidifying plaster with high evaporating ability which remains constant over time, resistant to sulphates, water-repellent and resistant against rain water. It is formulated to solve ...

... Silicon emulsion, organic bindings, mineral components, pigments, additives, water. Ecap® SC is water‐resistant, resistant to atmospheric agents, highly breathable to water vapour, washable ...

... resists to atmospheric agents, it is water‐repellent, transpiring to water vapour, washable, with shining colours, easily applicable. Copolymers into water dispersion, ...

Rebuild without demolish Ercole® is a cement coating that is applied to low thickness (from 1 mm to 3 mm) on damaged or severely deteriorated concrete of external surfaces. The correct application of the product guarantee ...

... and it is certified by Italcementi. Ercole® Ecoactive is ready for use, you need just to add water it is designed for low thickness coating on concrete, plaster, wood, asphalt and other surfaces. Ercole® ...

... surfaces) - Waterproof quality supplement, Class I1 or E4 V2 W2 A2 (micro fissured surfaces) Excellent flexibility. Bad weather resistant. Coating and opacifying. Micro porous and biological stains ...

... Holds perfectly Class D2 (sound surfaces) - Waterproof quality supplement Class D3 (surfaces with possible web cracks) Outstanding resistance to stains (more particularly biological stains) Highly coating ...

... stable and rigid hydraulic surfaces as specified by NF P 74202 (DTU 59/2) norm. Water and efflorescence resistant. Garnishing rustic aspect; imitates scraped coatings. Removes web cracks and defects ...

Fibre-reinforced, water repellent mineral skim coat made from lime and hydraulic binders, for application on surfaces with high mechanical strength, for interiors and exteriors Use A 64 R-EVOLUTION ...

... mineral-based wall coverings and for IP 10 finishing plaster available in 1-2-3 mm gradings. The advantages of greater water resistance: - Longer durability of the plaster - Dry walls and consequently better heat ...

... and coloured mineral wall coating for exteriors and interiors Use RF 100 is used as decorative plaster for exteriors and interiors. For exterior use we suggest lime and cement base coat plasters containing water ...

Water-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm. TECHNICAL DATA: Consistency: ...