Temperature detector CA 462

DIN railindustrialcommercial

CA 462 is designed to spy and detect temperature and leakage in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply. CA 462 is designed to spy and detect leakage and temperature in pumps and mixers. The amplifier is housed in a norm enclosure fitted for DIN-rail mounting. The unit is available in two executions, 24 VDC or 110-230 VAC supply. To minimize the risk of false alarms the leakage failure has to be detected for time duration of approximately 10 seconds. To simplify the mounting the unit is fitted with plug-in type of connectors. The unit has separate alarm outputs for temperature and leakage. CA 462 also has main contactor relay output energized depending on alarm/s with manual reset option. Included in the kit is also a Xylem MiniCas adaptor. Leakage monitoring with 10 sec alarm delay Wide resistance range, 0-100 kOhm Temperature monitoring Wide temperature range -20 to +50 ºC (-4 to +122 ºF) Max load alarm output relays 250 VAC 3 ampere Max load pump blocking relay 250 VAC 6 ampere Connection via plug in connectors DIN-rail mounted Leakage detection treshold (+/-10%) - 3.3 kOhm (PTC / Klixon) Alarm delay leakage - Approx. 10 seconds Ambient operating temperature - -20 to +50 ºC (-4 to +122 ºF) Ambient storage temperature - -30 to +80 ºC (-22 to +176 ºF) Degree of protection - IP 20, NEMA: Type 1 Housing material - PPO and PC Mounting - DIN rail 35 mm Installation category - CAT II Pollution degree - 2 Flame rate - V0 (E45329) Humidity - 0-95% RH non-condensing Dimensions - H x W x D: 108 x 70 x 58 mm (4.25 x 2.76 x 2.28 in.)