Highlightswith 2-way push switch - without claws
Intended use- Switching and dimming of lighting with trailing edge phase control
- Operation with suitable cover
- Installation in flush box with dimensions according to DIN 49073
Product characteristics- Dimming method: trailing edge phase control
- Switch-on via bulb-preserving soft start
- Minimum brightness can be saved permanently
- Maximum brightness can be saved permanently
- Electronic short-circuit protection
- Electronic over-temperature protection
- Satellite switching possible in combination with 2-way switch
Spare partFastening nut ref.-no.: MU 173 DD
Centre platesAS / A ranges: ref.-no. A 1740 ..
CD range: ref.-no. CD 1740 ..
LS range: ref.-no. LS 1740 .., .. 1740 ..
Claw set for 10 flush-mounted insertsref.-no.: 17 SPK
InformationArticle number: 1735 DD
EAN/GTIN: 4011377360556
Technical dataRated voltage: AC 230 V ~
Mains frequency: 50/60 Hz
Stand-by power: 0 W
Power loss: max. 2 W
Ambient temperature: 0 ... +35 °C
Connected load at 35 °C:
Incandescent lamps: 3 ... 200 W
HV halogen lamps: 3 ... 200 W
HV LED lamps: typical 3 ... 200 W
Electronic LED ballast with LED lamps: 3 ... 200 W
Reduction of load:
for every 5 °C exceededing 35 °C: −10 %
for installation into wooden or hollow walls: −15 %
for installation into multiple combinations: −20 %
Connection: screw terminals
single wire: 1 x 0.5 ... 2.5 mm²; 2 x 0.5 ... 1.5 mm²
stranded without ferrule: 1 x 0.5 ... 2.5 mm²; 2 x 0.5 ... 1.5 mm²
stranded with ferrule: 1 x 0.5 ... 2.5 mm²; 2 x 0.5 ... 1.5 mm²
Total length power cable: max. 100 m
LogisticSingle itemPackaging unit: 1 pc.
Weight: 111 G
Length: 82 MM
Height: 67 MM
Width: 82 MM
CartonPackaging unit: 10 pc.
Weight: 1.245 KG
Length: 357 MM
Height: 85 MM
Width: 170 MM
Outer cartonPackaging unit: 100 pc.
Weight: 13.025 KG
Length: 435 MM
Height: 365 MM
Width: 352 MM
PalettePackaging unit: 1200 pc.
Weight: 178.3 KG
Length: 1200 MM
Height: 1550 MM
Width: 800 MM
Caractéristiques / spécifications techniques- Article number: 1735 DD
- EAN/GTIN: 4011377360556
- Rated voltage: AC 230 V ~
- Mains frequency: 50/60 Hz
- Dimming method: trailing edge phase control
- Operating temperature range: 0 ... +35 °C
- Power loss: max. 2 W
- Stand-by power: 0 W
- Connected load (typical): 3 ... 200 W (incandescent, halogen, LED, electronic LED ballast)
- Protection: electronic short-circuit and over-temperature protection
- Connection: screw terminals; single and stranded wires (1 x 0.5 ... 2.5 mm²; 2 x 0.5 ... 1.5 mm²)
- Max. total length of power cable: 100 m
- Includes functions to save minimum and maximum brightness permanently