Coarse-layer mineral coating based on fine-grained marble dust, long-
aged grassello , as well as special fillers and additives that allow the material to be extended and the surface
easily textured .
Good adhesion and filling power, so it is not necessary to anchor surfaces free of dust and grease or to
fill uneven or cracked surfaces.
If necessary, apply a sealer or primer / primer.
Color preferably with our Esencia colorants, as they are compatible with products that contain lime.
Apply a first coat of ALHAMBRA with a steel trowel and smooth the surface. Let dry for 8
to 24 hours. Introduce the surface of the base of the steel trowel into the product so that
the material adheres.
Deposit the material by buffering or stamping on the wall in an irregular way without actually covering it
(leave approximately half free, depending on the desired Damask effect). There will be globs / patches
of fresh material with spikes / ridges when the trowel is removed. Let it pull for 10 to 30 minutes (
depending on the temperature and humidity) and smooth and compact with the steel trowel. There will be an
irregular pattern of smooth areas and others without covering, typical of the Damask effect. Let dry for 8 to 24
hours.