Light switch Comfort

with motion sensorsurface-mountcontemporary

The Busch-Comfort switch® flex combines the functions of a motion detector and a light switch. This allows you to switch the light in your rooms - manually or fully automatically. You have the option of linking the comfort switch to other functions. For example, you can switch on the light and the radio in the guest bathroom at the same time. Manual use is also optimised, as you can switch with one hand movement without touching a rocker - hygienic and simple. The detection range is 5 metres at the front and 3 metres at the side. The Busch-Comfort switch® flex is a light switch with integrated motion detector. It can be switched contactless, manually or time-controlled. With extension input Due to the intelligent extension unit input, the Busch-Comfort switch® flex can be integrated into almost all changeover and cross circuits. Only the remaining cross and changeover switches must be exchanged for push-buttons. The existing lines of the cross or changeover circuit can be used for extension unit operation. The 2-wire insert is very suitable for retrofitting. And the relay insert enables the connection of universal loads. Intelligent overrun time With the run-on time, the light automatically switches off again after a preset time (between 1 - 10 minutes). The integrated motion detector prevents you from standing in the dark despite your presence and restarts the selected overrun time. This function can be particularly practical in stairwells or corridors. The Busch-Comfort switch® flex automatically provides light - but leaves it on as long as you need it. If you leave the detection range or temporarily do not move, the light remains switched on.