Shade sail pole
aluminum

shade sail pole
shade sail pole
shade sail pole
shade sail pole
shade sail pole
Add to favorites
Compare this product
 

Characteristics

Type
shade sail
Material
aluminum

Description

Technical characteristics Aluminium pole Ø 50 mm Wall thickness 3 mm For additional strength masts are reinforced with galvanized steel-pipe on the inside Available in the colours white RAL 9016, anthracite grey RAL 7016 and anodized silver For additional fee also available in any RAL colours of our chart Anchorage only with ground sleeves, cannot be set directly into concrete Available in the colours white RAL 9016, anthracite grey RAL 7016, anodized silver, high gloss or, for an additional fee, any RAL colour of our chart. For added strength, masts are reinforced with a galvanized steel-pipe on the inside.The use of very long poles in combination with high tension may cause the poles to bend. This can be prevented by installing poles with a slight inclination and by providing additional counter tension using stainless steel cables. Anchorage Please note: Aluminium poles cannot be set directly into concrete! Ground sleeve Europe is required for installation. The sleeve consists of two parts which are connected by a bayonet joint. The lower half of the sleeve is set in concrete, with its top fl ush to the ground. The upper half can simply be slid into the lower half and be secured by a bolt. Once the ground sleeve is installed, the aluminium pole can be put into it and be secured with the screw knobs. When the sun sail is not used, the mast and upper half of the ground sleeve can be removed, leaving the lower half of the sleeve flush to the ground. The sealing cap springs shut automatically.

Catalogs

No catalogs are available for this product.

See all of CARAVITA‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.