Unfaced, light-density fiberglass batts for use in steel stud construction. Batts are designed for friction-fit installation.
Unfaced or kraft faced ceiling batts are designed to lay directly on suspended ceiling systems. Faced batts have no tabs. When installed they must be butted together.
To enhance acoustical and thermal performance of exterior and interior walls.
To improve sound transmission loss performance of suspended ceiling systems.
Unfaced batts rated noncombustible per ASTM E136.
Kraft faced batts suitable for non-exposed applications. Versatile: Enhances acoustical and thermal performance of interior and exterior walls and suspended ceiling systems.
Will not rot or mildew; resists fungal growth.
Lightweight, easily fabricated and installed.
CertaPro AcoustaTherm Batts are designed to fill the entire stud cavity and be held in place by friction-fit. For applications where the wall is not finished on both sides or the insulation does not fill the cavity, supplementary support of the insulation, such as wire or insulation pins, shall be provided to hold the insulation in place.
Install with the facing down toward the occupied area. When placing AcoustaTherm Batts over suspended ceiling panels, refer to the suspended ceiling manufacturer's recommendations to ensure proper installation. Kraft facings are combustible; do not use in exposed applications. Check local code requirements.
CertainTeed insulation products improve building energy efficiency and reduce building energy consumption for the life of the structure. As a result, they help conserve nonrenewable energy sources, decrease dependence on foreign oil and lower greenhouse gas emissions.