Air/water heat pump DHW 100PWH

homemonoblocfor hot water

The wall-mounted DHW 100PW hot water heat pump is an efficient and economical solution for heating water and, with a capacity of 100 litres, is ideal for use in flats and on the floor of apartment blocks. Wall-mounted hot water heat pump for new build and refurbishment Wall-mounted hot water heat pump 100 l with natural refrigerant R290 and defrost function for utilising outdoor and indoor air. Frost-free installation indoors. High-quality cylinder insulation to minimise standstill losses, energy efficiency class A (tap cycle M). Ideally suited for hot water preparation in existing buildings due to simple installation. Operation and setting via rotary control and setting buttons. Various operating modes can be set, e.g. turbo function, PV function, time programmes. Visualisation of the settings on the display. Max. achievable temperature of 55 °C in pure heat pump operation (setting range 30 °C - 65 °C) with the option of increasing the hot water temperature to 65 °C by means of a built-in additional heating element (1.0 kW). Can be installed in rooms with a low ceiling height (2.0 m). Maximum pipe length for air intake and air discharge 5 m (air intake 125 mm / air discharge 80 mm). Air intake possible inside buildings without air ducts, duct can be optionally connected to utilise exhaust air or waste heat from neighbouring rooms. Enamelled cylinder with corrosion protection anode, tilt dimension 1,350 mm. Mixed water volume of 40 °C at 60 °C cylinder temperature 142 litres. PV utilisation for heat pump and heating element possible. Wall-mounted hot water heat pump including wall bracket.