Binary input interface module EK-CC2-TP

binary outputDIN railKNX

KNX bus device functioning as 2-channel input for the connection of potential-free contacts and 2-channel output for control of low-consumption LED. Mounting in wall box or on 35 mm rail (EN 60715) with the support EK-SMG-35 (to be ordered separately). Power supply via bus. Bus terminal block included in the delivery. To be used in KNX installations for home and building automation. ON/OFF switching of single loads or group of loads dimming of lighting devices operating of shutters and roller blinds detecting the state of signaling contacts (from safety devices, alarms, etc.) recalling and saving of scenes sending on the bus of values (temperature, brightness, etc.) switching to forced functioning (lock) counting of impulses and switching cycles controlling of low-consumption LED to be used as state feedback, orientation nightlights, etc. KNX bus device for connecting conventional (not KNX) switches, sensors or NTC temperature sensors (to the inputs) and/or lowconsumption LEDs (to the outputs). It has to be used in KNX installations for control of homes and buildings. The ekinex® universal interface is a KNX S-mode device that can be used as input or output. Depending on the version, the device is provided with: - inputs to connect to the bus devices with free-potential contacts or NTC passive temperature sensors; - output to control low-consumption LEDs. The device is provided with an integrated bus communication module and is realized in a compact design for installation in flush-mounting wall boxes. The device is powered by the KNX bus line with a SELV voltage 30 Vdc and does not require auxiliary power.